Használati útmutató Siig CE-H21712-S1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Siig CE-H21712-S1 (8 oldal) a audio/videó-konverter kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
1
HDMI to DVI + Audio
Converter
Quick Installation Guide
Introduction
The HDMI to DVI + Audio Converter provides an easy
solution for converting digital HDMI to digital video
(DVI-D) and both digital audio (S/PDIF) and analog
stereo audio. This device enables you to connect full
digital video and audio to DVI enabled monitors and
coaxial S/PDIF equipped audio receivers and amplifiers
for highest compatibility to your home theater system.
Features and Benefits
Converts an HDMI source to DVI video & digital/
analog audio
Supports PC graphics resolution up to WUXGA
(1920x1200@60)
Supports digital (S/PDIF) & analog audio
Supports HDMI source format up to 1080p
Metal housing for better RF shielding
Note: This product does NOT strip HDCP from the
source device/content. If the source device/content
is HDCP enabled/protected, the display has to be
HDCP compliant to work.
Package Contents
HDMI to DVI + Audio Converter
Power adapter (5V, 2A)
Quick installation guide
04-0845A
2
Technical Specifications
Bandwidth: Single-link 165 MHz (4.95Gb/s)
Input Video Signal: 1.2 Volts p-p
Input DDC Signal: 5 Volts p-p (TTL)
Supports resolutions up to 1080p@60Hz and UXGA
(1600x1200@60Hz) and W UXGA (1920x1200@60Hz)
HDMI connector: 19 pin type female connector
DVI connector: DVI-I 29 pin female (digital only)
RCA connector: Coaxial S/PDIF
Audio out: Analog stereo jack
Power supply: Output - 5VDC, 2A
Power consumption: 10 watts (max)
Layout
Front Panel
Figure 1: Front Panel
HDMI In: connects to an HDMI source device
Status LED & Power LED: indicates the activity and
power status
Rotary Switch: audio output and EDID settings. See
Rotary Switch section on page 3.
Power Jack: connects the power adapter here
HDMI
In
Status
LED
Rotary
Switch
Power
Jack
Power
LED
3
S/PDIF
Audio Out
DVI Out
Rear Panel
Figure 2: Rear Panel
S/PDIF Audio Out: connects to S/PDIF (RCA)
enabled PC or speakers
Stereo Audio Out: connects to PC audio in,
headphones or stereo analog speakers
DVI Out: connects to your DVI display
Rotary Switch
Position 0: Analog audio output
Position 1: Analog audio output
Position 2: Analog audio output
Position 3: Analog audio output
Position 4 & 5 : Reserved
Position 6: Restore default EDID
Position 7: Learn EDID of HDMI equipped device
The function of the rotary switch is reserved,
please keep the rotary switch at 0.
Stereo
Audio Out

Termékspecifikációk

Márka: Siig
Kategória: audio/videó-konverter
Modell: CE-H21712-S1

Szüksége van segítségre?

Ha segítségre van szüksége Siig CE-H21712-S1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók audio/videó-konverter Siig

Útmutatók audio/videó-konverter

Legújabb útmutatók audio/videó-konverter