Használati útmutató SilverStone RMS02
Olvassa el alább 📖 a magyar nyelvű használati útmutatót SilverStone RMS02 (4 oldal) a Számítógép behuzás kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/4

EXT=300MM
M5x0.8P
M5x0.8P
M5x0.8P
M5x0.8P
H-370 4PC
H-370 4PC
H-370 4PC
H-370 4PC
Ø12
Ø12
Ø12
Ø12
18.0
15.0
Ø8,4
Ø8,4
Ø8,4
Ø8,4
2.0
2.0
2.0
2.0
6.0
6.0
6.0
6.0
H-315 4PC
H-315 4PC
H-315 4PC
H-315 4PC
Stag -Beatle tool-less server slide, 180 pounds (80kg) loading.
Quick installation Guide of RMS02
A. Please note that the 180lb-grade SB Tool-less is designed and built
for 2U chassis or above. Not recommended for 1U applications.
B. The SB bracket is for EIA rail with hole pitch as shown on fig-1 and
square holes, and can only be mounted behind the rail. You will
need to purchase transfer bracket in order to mount SB bracket on
the rail with round holes. The standard retail packaging shall include
one piece of left hand,one piece of right hand, 4 pieces of H-370
screws for ear plate fastening and 2 pieces of H-315 screws for
chassis fastening.
* The 180lb-grade SB tool-less is not designed to be screw mounted.
You Must mount the slides with bayonet pre-formed on the chassis.
CHASSIS
CHASSIS
CHASSIS
CHASSIS
40.00
40.00
40.00
40.00 A
A
A
A
EAR BRKT
MAX=40mm
24.0
24.0
24.0
24.0
MIN=662.0±3
MAX=914.0±3
5.5
5.5
5.5
5.5
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
(Fig-1)
8.0
8.0
8.0
8.0
1.50
1.50
1.50
1.50


Please secure the screws on both sides and push back the inner member to allow the rail
slide to be fixed to the rackmount chassis. Moreover, please make sure the spring clip
installation has been completed on the rackmount chassis when finishing this step.
*Bayonet on chassis shall be pre-formed as per the recommended dimension and location.
*If you need to remove the inner member from the rackmount chassis, please pull up spring
clip first and then push forward to allow the spring clip to separate from the inner member.
If you had already installed the screw in your rackmount chassis, please remove the screws
first.
Ø8,4
2.0
6.0
H-315
*Release safety lock
before mounting
4
* VERY IMPORTANT – IT REQUIRES AT LEAST 2 PEOPLE TO INSTALL THE
G11223540
CHASSIS FOR SAFETY PUROPOSE.
Retainer
Termékspecifikációk
Márka: | SilverStone |
Kategória: | Számítógép behuzás |
Modell: | RMS02 |
Szüksége van segítségre?
Ha segítségre van szüksége SilverStone RMS02, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Számítógép behuzás SilverStone
6 Január 2025
6 Január 2025
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
Útmutatók Számítógép behuzás
- Számítógép behuzás Rosewill
- Számítógép behuzás Akyga
- Számítógép behuzás Jonsbo
- Számítógép behuzás Krux
- Számítógép behuzás Akasa
- Számítógép behuzás Razer
- Számítógép behuzás Chenbro Micom
- Számítógép behuzás XPG
- Számítógép behuzás StarTech.com
- Számítógép behuzás Sharkoon
- Számítógép behuzás Zalman
- Számítógép behuzás Dell
- Számítógép behuzás Thermaltake
- Számítógép behuzás Supermicro
- Számítógép behuzás Intel
Legújabb útmutatók Számítógép behuzás
9 Április 2025
7 Április 2025
5 Április 2025
3 Április 2025
2 Április 2025
1 Április 2025
1 Április 2025
30 Március 2025
30 Március 2025
29 Március 2025