Használati útmutató Smeg SR60GHU3

Smeg sütő SR60GHU3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Smeg SR60GHU3 (12 oldal) a sütő kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.9 csillagra

Letöltés PDF

Oldal 1/12

Table of Contents

WARNING: For your safety, the information in this manual must be followed to minimize the risk

of fire or explosion, or to prevent property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors and liquids near this or any other

appliance.

WHAT TO DO IF YOU SMELL GAS

• Do not attempt to switch on any appliances.

• Do not touch any electrical switches.

• Do not use any phones in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

• lf you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified engineer who is able to

install, commission and test the appliance

1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4

2. COOKTOP MEASUREMENTS ............................................................................................... 5

3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS .................................... 6

3.1 Gas supply requirements ................................................................................................................................ 8

3.2 Electrical requirements .................................................................................................................................... 9

4. INSTALLING THE COOKTOP ............................................................................................... 11

5. CHECKING OPERATION ...................................................................................................... 13

6. WIRING DIAGRAMS ............................................................................................................. 14