Használati útmutató SMK-Link RemotePoint Sapphire VP4585

SMK-Link Vezeték nélküli műsorvezető RemotePoint Sapphire VP4585

Olvassa el alább 📖 a magyar nyelvű használati útmutatót SMK-Link RemotePoint Sapphire VP4585 (9 oldal) a Vezeték nélküli műsorvezető kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/9
VP4585
Page 1
Laser Safety Statement
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
The laser is activated by pressing the laser button identified in the user guide.
Do not stare into the laser beam, or shine the laser at others.
Do not allow minors to use the laser unsupervised.
Do not disassemble the device, it has no serviceable parts.
Do not immerse in any liquid or expose to heat or moisture.
Use only within the designed operating temperature range
of 0-40 degrees C.
Laser Specications:
The laser used in the VP4585 complies as Class 2 laser product with: IEC/
EN 60825-1: 1994+A1+A2, and CFR Title 21 1040.10 and 1040.11, except
for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Page 3
Step 1
Install the Batteries
(Supplied)
Open the battery compartment
by pressing down the
cover latch and sliding the
door off the Presenter.
Insert the two supplied AAA
batteries to the battery slots.
Make sure the positive (+) and
negative (-) ends of the batteries
match the polarity markings
inside the battery compartment.
Slide the battery cover
back into position.
Slide the battery cover off
Insert the batteries

Termékspecifikációk

Márka: SMK-Link
Kategória: Vezeték nélküli műsorvezető
Modell: RemotePoint Sapphire VP4585

Szüksége van segítségre?

Ha segítségre van szüksége SMK-Link RemotePoint Sapphire VP4585, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vezeték nélküli műsorvezető SMK-Link

Útmutatók Vezeték nélküli műsorvezető

Legújabb útmutatók Vezeték nélküli műsorvezető