Használati útmutató Soundskins SSK-RAP4DRV2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Soundskins SSK-RAP4DRV2 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/3
Truck Door Kit Instructions
1. Start by locating the fastening hardware on the door
panel, take the appropriate screw driver and remove.
2. Once all the screws are removed you can take off the
door panel using a panel tool. Be sure to not break any
of the clips or mounting hardware. Pull panel away slowly
and unplug any electrical connections.
3. Now you are ready to prep the metal surface
using a microfiber cloth, Acetone (use a breathing mask),
and wipe away any moisture, oil, debris or etc. Then let air
dry for an appropriate time. The point is to get the surface
clean to ensure material glue contact.
R
• Screw driver
• Panel tool
• Microber cloth
• Acetone or cleaning solution
• Razor blade
• Roller
Tools needed for installation:

Termékspecifikációk

Márka: Soundskins
Kategória: nincs kategorizálva
Modell: SSK-RAP4DRV2

Szüksége van segítségre?

Ha segítségre van szüksége Soundskins SSK-RAP4DRV2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek