Használati útmutató Speco Technologies SP30PTB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Speco Technologies SP30PTB (1 oldal) a hangszóró kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.9 csillagra

User Installation and Assembly Instructions

Hanging Pendant Speakers(SP30PT/SP30PTB)

•Ideal for installationswhere ceiling

or wall mounting is prohibitive

•Built-in 70/25V transformer

•Speaker includes hanging mount chain

Installation

A. Recommendedwiring:18 gauge copper wire (or heavier)

B. Note: Speaker wirealone is NOT sufficient for mounting.

Aseparate mounting wire, chain or cable (not included) MUST be used.

C.Useextremecareinmounting. Useawire,chainorcable(notincluded)capableofsupporting

at least 20 pounds of weight, and attach securely to overheard rafters or secure mount in ceiling.

D. Fasten endof wire, chain or cable securely to the topof the included tri-cable hangingmountchain.

E.Insert each of the three sections to the three built-in hooks on the speaker.

F.In installations where safety is an extremeconcern or where required by local jurisdiction,

an additional safety loop has been installed to the top of the speaker.

It is recommended touse this loop in all installations.

G.Speco Technologies assumes no liability for improperly installed speakers.

H. Refer tobelow illustrations for assembly instructions

Hanging

Installation

SP30PT (White)

SP30PTB (Black)

Woofer 5.25" Polypropylene

Tweeter 1/2” Mylar

Frequency 95Hz-20kHz

SPL 92 +/- 2 dB

Wattage 30Watt RMS/60Watt Max

Impedance 8 Ohms

Transformer 70V/25V (30W/15W/ 7.5W/ 5W/2.5W)

Attach end of mounting

cable through swivel

mount at topof

hanging mount chain

Loops atendof each section

willslide rightoverhookon speaker.

Specifications

sp30pt/b installsheet:Layout 1 12/16/08 12:50 PM Page 1

Termékspecifikációk