Használati útmutató Speco Technologies SP6OCT
Oldalak 1 Engels hangszóró
Olvassa el ingyen online a(z) Speco Technologies SP6OCT használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 20 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
SP6OCT 70V 6.5” Weather-Resistant In-ceiling Speaker with Backcan and Transformer
Thank you for your purchase of Speco Technologies SP6OCT. This speaker is constructed to meet the IP66 rating, so it can be used in outdoor or humid environments. All
Speco Technologies’ outdoor speakers come with a 5-YEAR warranty against manufacturing defects, so you can be confident in your choice of product.
INSTALLATION INSTRUCTIONS:
1)For optimal installation, this speaker should be used with the Speco
Technologies accessories indicated to the right.
2)Cut an 8.2” diameter hole in your ceiling or ceiling tile.
3)This assembly requires at least 6.5” clearance from the entry point to
the top of ceiling.
4)Install all products in the order shown.
5)This speaker has a transformer dial. Select the power setting you’d
like for this speaker. It will be easier to select your power before
installing the speaker.
6)To install the speaker, you must remove the magnetic grille.
7)Once the grille is off, turn all the L-brackets so that they are locked
facing in, and put the speaker into your cutout and mounting
bracket. Once through, turn all the L-brackets again so that they
are facing out, and using a Phillips screwdriver, turn each of the four
until they clamp the bracket and ceiling tile securely.
8)There are a brown and a blue wire coming out of the speaker. The
brown wire is the (+) positive wire.Wire this lead to the positive wire
running from your amplifier.
9)The blue wire is the (-) negative wire. Wire this to the negative lead
from your amplifier.
10)IMPORTANT: Ensure the total power of all wattage taps selected on
all speakers running from this amplifier does not exceed 80% of the
rated power of the amplifier. (e.g., if the amp rated power is 100W,
do not put more than 80W of speakers on it). Speco Technologies
is NOT responsible for damage to equipment due to improper
installation.
11)IMPORTANT: Ensure you are wiring the proper voltage. Only use 70V taps with a 70V amplifier. Speco Technologies is NOT responsible for damage to equipment
due to improper installation.
12)If daisy chaining speakers, ensure speakers remain in phase by keeping all the positives wired together and all the negatives wired together.
13)Replace grille once your speaker is mounted.
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com
Rev. 04/30/20
POSITIVE
NEGATIVE
Brown
Blue
Termékspecifikációk
| Márka: | Speco Technologies |
| Kategória: | hangszóró |
| Modell: | SP6OCT |
Szüksége van segítségre?
Ha segítségre van szüksége Speco Technologies SP6OCT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók hangszóró Speco Technologies
Speco Technologies SPCDC6 Útmutató Speco Technologies WBM6T Útmutató Speco Technologies SPC15RP Útmutató Speco Technologies G86TG1X1 Útmutató Speco Technologies SPG86T Útmutató Speco Technologies SPCE5OB Útmutató Speco Technologies SP6NXCTUL Útmutató Speco Technologies SP5MATB Útmutató
Összes Speco Technologies hangszóró használati útmutató
Népszerű termékek – hangszóró
Speco Technologies SP6MAT Útmutató Speco Technologies SPC15R Útmutató Speco Technologies SPC12RP Útmutató
Útmutatók hangszóró
Legújabb útmutatók hangszóró
Klipsch Synergy C-3 Útmutató Klipsch PIC-650-T Útmutató Klipsch R-2650-C Útmutató Klipsch R-2650-CSM Útmutató Klipsch Reference RB-15 Útmutató Klipsch PIC-800-T Útmutató Klipsch PIC-800-SW-T Útmutató Polk REACT SOUND BAR 1 Útmutató Sennheiser AMBEO Soundbar Plus SB02M Útmutató Klipsch Reference RB-25 Útmutató