Használati útmutató Speco Technologies V5T3M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Speco Technologies V5T3M (9 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/9
USER MANUAL
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
V5B3/V5B3M/V5D3/V5D3M/V5T3/V5T3M
Warnings
If the product does not work properly, please contact the dealer or where the product was purchased.
Speco Technologies is not responsible for any problems caused by improper operation or repair.
and humidity during transportation, storage, and/or installation.
Do not install near sources of heat.
Only install the product in environments inside the specification operating temperature
and humidity range.
Do not install the camera near power lines, radar equipment or other electromagnetic
radiation.
Do not block any ventilation openings if any.
Use all the weatherproofing hardware requirement to minimize weather intrusion.
This camera series is the latest technology and advanced circuit design, which features high definition and
sensitivity, low noise and distortion and supports HD video transmission with the common coaxial cable,
ensuring the requirement of the HD monitoring in the traditional surveillance system.
Introduction
High Resolution
Adopt high performance sensor, providing high definition and clear image.
High Transmission Performance
Real time transmission with high speed and long distance- .
DNR
Reduce noise from brightness and color signal .
OSD
Access the camera settings which can be clearly displayed through the main menu.
White Balance
Adjust the color temperature according to the environment automatically.
ICR Auto Switch
The filter will filter infrared light during the daytime and change to normal at night to
ensure a high sensitivity and clear image .
AGC
Adjust the gain of amplifier, enabling the camera to output the standard video signal in different
lighting condition.
Wide Dynamic Range (WDR)
When there are both very bright and very dark areas simultaneously in the field of view, this function
will balance the brightness level and provide clear images.
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
1
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: Four video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is strong eno ugh to withstand three times
the weight of the camera. Please install and use the camera in the dry environment.
Youd better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
Mounting for V5B3/V5B3M
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route and connect the cables .
3. Secure the mounting base with camera to the wall with screws as shown below.
4.6
25.1
82.0
72.2
120°
120°
62.5mm
18.1mm
36.1mm

Termékspecifikációk

Márka: Speco Technologies
Kategória: nincs kategorizálva
Modell: V5T3M

Szüksége van segítségre?

Ha segítségre van szüksége Speco Technologies V5T3M, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Speco Technologies

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025