Használati útmutató Speco Technologies ZIPK8WN2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Speco Technologies ZIPK8WN2 (3 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.8 csillagra

Speco Gray Viewer Series Surveillance System

After Wireless NVR startup is completed, the Startup Wizard will be displayed. Wizard setting menu

includes: Set Admin Password ,Homepage, HDD Management, Network Configuration, Email

Configuration , Record Schedule and General System Configuration.

Set Admin Password

2) Homepage and HDD Management

You can click “Cancel” to skip Start Wizard. Check “Don't show this window next time" if you

don’t want to display Start Wizard when system start-up.

Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full.

For example, if you choose the option 7 days then only the last 7 days recordings are kept

on the HDD. To prevent overwriting any old recordings, select Disable. If you have disabled

this function, please check the HDD status regularly, to make sure the HDD is not full.

Please create a user name and password for your device.

Select the HDD which you want to format, and then click “Format HDD” button to format the HDD.

The hard drive comespreformattedif a new hard drive is installed for the first time -, ,

it will need to be reformatted .

Install the cameras on the walls and connect the power adapters to

each camera. Tip: The recorder should be at the center of all the

cameras for best performance.

Plug in the Wireless NVR power adapter to the wall outlet. You

may use the included power cable extensions for the cameras

and/or recorder to desired power outlet if needed.

Connect the Wireless NVR to your router using the LAN ports with

the included Ethernet cable so that you may view the cameras

from a web browser or mobile device (optional).

When the Wireless NVR is powered on,it will automatically start the pairing

process with the cameras. Once the process is complete,the Wireless

NVR will display live video feeds from your cameras and then start

recording.

You will briefly see a live video on display before you start the Startup

Wizard.

To configure the advanced settings for device, please follow the Startup

Wizard instructions to complete installation as shown below.

(1)

(2)

(3)

(4)

NO Physical interfaceConnection

Ground connectionA terminal to connect a separate ground cable .

* Make sure to add aground cable in order to use the equipment safely .

SDSD Port

USB portConnect with USB .

HDMI

Connect with HDMI display devicessuch as PC monitor , .

WAN RJ45:( )

Network port

Connect with WANEthernet cable , .

Power portConnect with the power supply DC12V 2Aincluded with the device , .

1

2

3

4

5

6

AntennaReceive signal from wireless camera .

7

1

3

57

6

4

22

1

3

57

6

4

22

(3)

(5)

(6)

Termékspecifikációk