Használati útmutató SSV Works WP-RZO + 2

SSV Works hangszóró WP-RZO + 2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót SSV Works WP-RZO + 2 (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 22 ember találta hasznosnak és 11.5 felhasználó értékelte átlagosan 3.7 csillagra

Oldal 1/2
Tools Needed For Installaon
WP-RZO + 2
POLARIS RZR OVERHEAD 2 SPEAKER ADD ON
Drill with Drill bits
Phillips Head Screwdriver
Wire Crimpers / Strippers
Thread locker
1) From the underside of the cage, place the enclosure into the rear cage area.up
2) While holding the enclosure in place, put one of the brackets on top of the enclosure and using the
screws provided. Screw into the threaded insert on the enclosure. Do not over tighten the screws. (it is
recommended to use -Tight or another type of thread locker to prevent the screws from Loc
loosening)
3) Repeat for the second bracket
4) This is an step that can be done if you desire, Using a drill and drill bit, pre drill the holes for the optional
screws to mount the brackets to the cage, Once the holes are pre drilled, screw the provided screws into
the holes you just drilled to secure the enclosure in place.
Figure 4
Figure 1 Figure 2
Figure 3

Termékspecifikációk

Márka: SSV Works
Kategória: hangszóró
Modell: WP-RZO + 2

Szüksége van segítségre?

Ha segítségre van szüksége SSV Works WP-RZO + 2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek