Használati útmutató Standard Horizon BU-1 Bluetooth Adapter Unit

Standard Horizon Tengeri BU-1 Bluetooth Adapter Unit

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Standard Horizon BU-1 Bluetooth Adapter Unit (2 oldal) a Tengeri kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Installation
1. Remove the six screws and the washer se-
curing the Front Panel and then carefully
separate the Front Panel from the Rear case.
Connector
BU-1 Bluetooth® Adapter Unit
Please be sure to follow these safety precautions.
Turn the transceiver power off, and disconnect all cables from the transceiver.
Touch a metal place to discharge any static electricity from your body.
Double-side tape
If you use the GX5500S, disconnect the
wire from the Printed Circuit Board in the
Front Panel.
2. Locate the connector for the BU-1.
Peel the covering of the double-side tape on
the Printed Circuit Board.
3. Carefully align the connector on the BU-1
with the connector on the Printed Circuit
Board, and gently press the BU-1 into place.
4. Replace the Rear Case, using the screws and
washer removed in the first step.
Note: If you used the GX5500S, Attach the
Wire to the connector on the Printed
Circuit Board in the Front Panel.
Be certain the Rubber packing on the Rear
case is correctly installed, and the rear
case adheres and seals properly.
5. Installation is now complete.
BU-1
Wire

Termékspecifikációk

Márka: Standard Horizon
Kategória: Tengeri
Modell: BU-1 Bluetooth Adapter Unit

Szüksége van segítségre?

Ha segítségre van szüksége Standard Horizon BU-1 Bluetooth Adapter Unit, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek