Használati útmutató StarTech.com CBMMCTTOOL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com CBMMCTTOOL (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.4 csillagra

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 17, 2020 4:13 PM

Product Diagram (CBMMCTTOOL)

ComponentFunction

1Lever

• Used to remove excess Cable from a Steel

Cable Tie, after it has been tightened.

2Head

• Used to hold a Steel Cable Tie during the

tightening process.

3Nose

• Used to align the Steel Cable Tie through the

Head of the Cable Tie Tool.

4Grippers

• Used to grip a Steel Cable Tie during the

tightening process.

5Handles

• Used to tighten a Steel Cable Tie during the

tightening process.

Requirements

For the latest requirements, please visit www.startech.com/CBMMCTTOOL

• Steel Cable Tie

• Set of Cables

• Safety Gloves

Using the Cable Tie Tool

It is recommended that you put on a pair of Safety Gloves before handling the Steel

Cable Tie.

Metal Cable Tie Tool

1. Wrap a Steel Cable Tie around a set of cables.

2. Insert the end of the Steel Cable Tie through the Self Locking Head on the Steel

Cable Tie.

3. Pull the end of the Steel Cable Tie to tighten the Steel Cable Tie around the set of

cables.

4. Insert the end of the Steel Cable Tie through the side of the Head of the Cable Tie

Tool so that the Steel Cable Tie is in-between the Nose of the Cable Tie Tool and

feeds out the back of the Head of the Cable Tie Tool in-between the Grippers.

Routing the Steel Cable Tie through the Cable Tie Tool

5. Push the Head of the Cable Tie Tool towards the Self Locking Head on the Steel

Cable Tie.

6. Squeeze the Cable Tie Tool’s Handles together, tightening the Steel Cable Tie

around the set of cables.

Note: You will have to squeeze the Cable Tie Tool’s Handles several times in order

to tighten the Steel Cable Tie around the set of cables.

7. When you have reached the maximum tension. Use the Lever to remove the excess

Steel Cable Tie.

Note: Be careful not to over-tighten the Steel Cable Tie, as you may damage the set

of cables.

2

3

5

1

4

Cable Tie

Notch

Cable Tie

Notch

Termékspecifikációk