Használati útmutató StarTech.com KEYBOARD-TRAY-CLAMP1
Oldalak 2 Engels nincs kategorizálva
Olvassa el ingyen online a(z) StarTech.com KEYBOARD-TRAY-CLAMP1 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 24 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: January 28, 2022 3:27 PM
Product Diagram (KEYBOARD-TRAY-CLAMP1)
ComponentFunction
1Desk Clamp, Left• Attach the Keyboard Tray to the Desk
2Keyboard Tray• Place a keyboard and a mouse on the Keyboard Tray
3Desk Clamp, Right• Attach the Keyboard Tray to the Desk
4Clamp Knob• Turn by hand to secure the Clamp to the Desk
5
Height Adjustment L
Bracket
• Adjust the height between the Desk and the
Keyboard Tray
• Attach the Keyboard Tray to the Desk Clamp
Package Contents
• Keyboard Tray x 1
• Height Adjustment Screws x 5
• Tray Mounting Screws x 5
• Height Adjustments L Brackets x 2
• Desk Clamp Left x 1
• Desk Clamp Right x 1
• Quick-star Guide x1
Desk Clamp Keyboard Tray
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.startech.com/KEYBOARD-TRAY-CLAMP1
• Phillips Head Screwdriver
Installation
WARNING!
Do not exceed the weight capacity of this product. Overloading this product might
result in injury or property damage. This product can support the following weight: up
to 11.8 kg (26 lbs).
Ensurethe mounted Keyboard Tray is properly secured to the Desk before use.
Attach the Desk Clamp to the Height Adjustment L
Brackets
1. Determine the desired height between the Desk and the Keyboard Tray: 100,
120, or 140 mm (3.9, 4.7, or 5.5 in). Each row of holes on the Height Adjustment
L Bracket are spaced 20 mm apart. The row of holes, located closest to the bend
of the Height Adjustment L Brackets, provides the minimum height adjustment
setting of 100 mm (3.9 in).
2. Secure the Height Adjustment L Bracket to the Desk Clamps using the Height
Adjustment Screws (x2 shorter screws) and tighten using a Phillips Head
Screwdriver to complete the rst Desk Clamp Assembly (Figure 1).
3. Repeat steps 2 and 3 to install the second Desk Clamp Assembly
Attach the Desk Clamp Assemblies to the Keyboard Tray
1. Flip the Keyboard Tray upside down and align the mounting holes located on
3
1
2
5
4
Figure 1
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | nincs kategorizálva |
| Modell: | KEYBOARD-TRAY-CLAMP1 |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com KEYBOARD-TRAY-CLAMP1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva StarTech.com
StarTech.com USB32DVCAPRO Útmutató StarTech.com SATDOCKU3SP Útmutató StarTech.com UNIRAILS1U Útmutató StarTech.com S2510BMU33-IRS Útmutató StarTech.com EC1S950 Útmutató StarTech.com MICATXPOW255 Útmutató StarTech.com USB2G4LEXT2 Útmutató StarTech.com CABSHELF116V Útmutató