Használati útmutató StarTech.com LAPTOP-SIT-STAND

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com LAPTOP-SIT-STAND (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.7 csillagra

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: May 18, 2022 3:20 PM

3

1

Product Diagram (LAPTOP-SIT-STAND)

Front View

Bottom View

ComponentFunction

1Slide Button• Push-in to Raise or Lower the workstation

2Workstation Surface• Place a laptop, keyboard, and a mouse

3Upper Frame

• Supports the workstation. Adjusts the Height in Six

DierentPositions from 1.8 to 15.9 in (45 to 405 mm)

4Lower Frame

• Stabilizes the workstation. Foam pads at the bottom

protect the desk surface

5Finger Guard

• Helps prevent trapping your ngers when Lowering

the workstation

Ergonomic Adjustable Laptop Sit Stand Desk Converter

Package Contents

• Desktop Sit-Stand Workstation x 1

• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.startech.com/LAPTOP-SIT-STAND

Installation

WARNINGS!

Do not exceed the weight capacity of this product. Overloading this product might

result in injury or property damage. This product can support the following weight: up

to 17.6 lb (8 kg).

When adjusting the height of this product, ensure that the mounted equipment is

properly secured and the weight is supported until the locking mechanism is fully

engaged. Adjust the height at a slow speed to prevent any equipment instability.

Failure to follow these guidelines may result in property damage and/or personal

injury.

Stored Energy Hazard! This product contains a spring mechanism that can cause the

assembly and/or mounted equipment to move forcibly and quickly upwards when the

slide button is pressed.

Pinch Hazard! Keep your ngers clear from moving components. Do not place your

ngers past the nger guard at the bottom of the workstation surface when lowering

it.

1. Cut the security plastic Tie that Holds the Upper Frame to the Lower Frame .

2. Carefully Remove the foam Pad installed on the Slide Button.

Operation

When adjusting the height of this product, always use two hands to ensure a

controlled movement.

Ifthe slide button is pushed in and without releasing, you can adjust the height of the

upper frame in one movement to any of the available height positions. Until the slide

button is released, the height of the upper frame cannot be locked.

Dueto the spacing of the locking holes, the user must continue to support the

workstation weight until the locking mechanism is engaged.

2

4

5

Termékspecifikációk