Használati útmutató StarTech.com MOD4AVHD
Oldalak 2 Engels nincs kategorizálva
Olvassa el ingyen online a(z) StarTech.com MOD4AVHD használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 19 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Quick-Start Guide
Manual Revision: 11/09/2018
Product Diagram
Actual product may vary from photos.
Front View
Rear View
Package Contents
• A/V Module x 1
• Universal Power Adapter x 1
• Power Clips (NA, EU, UK) x 3
• Mounting Bracket x 1
• Mounting Bracket Screws (M5 x 20 mm) x 4
• Module Screws (#6-32 x 3/16”) x 8
• Quick-Start Guide x 1
SKU #: MOD4AVHD
A/V Connectivity Module for BOX4MODULE and BEZ4MOD
Requirements
• Power Source (i.e. AC Electrical Outlet)
Installation Requirements:
• Mounting Surface
• Mounting Bracket x 1
• Mounting Bracket Screws (M5 x 20 mm) x 4
• Module Screws (#6-32 x 3/16”) x 4
• Writing Utensil x 1
• Phillips Head Screwdriver x 1
For the latest requirements, please visit:
www.startech.com/MOD4AVHD.
Installation
See the Installation section in the Modular Conference Table
Box (BOX4MODULE) or Single-Module Conference Table Box
(BEZ4MOD) for instructions on how to install a User Manual
Module.
These can be found under the tab at: User ManualsSupport
www.startech.com/BOX4MODULE
www.startech.com/BEZ4MOD
(Optional) Mounting the Module
Note: StarTech.com is not responsible for any damages related to
the installation of this product.
Note: Before mounting the , consider the desired Module
orientation of the ports (front and rear).
1. Align the with four on the Mounting BracketMounting Holes
Module.
Note: There are four on each side of the Mounting Holes
Module, which gives you two dierent mounting options.
2. Insert the (x4) through the Module ScrewsMounting Bracket
and into the .Mounting Holes
3. Tighten the using a . Module ScrewsPhillips Head Screwdriver
Do not overtighten the Module Screws.
4. Before installing the on or under yourMounting Bracket
Mounting SurfaceMounting , measure and position the
Bracket Module in the desired location. The can be mounted on
a vertical or horizontal .Mounting Surface
5. (Optional) Depending on the you are using Mounting Surface
to install the product, you may need to drill pilot holes prior to
installing the into the Mounting Bracket ScrewsMounting
Surface.
6. Mark the location of the using a Mounting HolesWriting
Utensil. These marks can be used as a guide to indicate where
the will be installed in the surface.Mounting Bracket Screws
7. Install the Mounting Bracket Screws (x4) through the Mounting
BracketMounting SurfacePhillips Head and into the , using a
ScrewdriverMounting Bracket Screws. Do not overtighten the .
Warning: To prevent the from Mounting Bracket Screws
penetrating the opposite side of the , be Mounting Surface
conscious of the length of the Mounting Bracket Screws
compared to the depth of the .Mounting Surface
For the latest information, specications, and support visit www.startech.com/MOD4AVHD
Power
LED
Reset
Button
RJ45
Passthrough
Port
VGA In
Port
Audio
In Port
HDMI
In Port
DisplayPort
In Port
RJ45
Passthrough
Port
HDMI
Out
Port
Audio
Out
Port
DC
5V 2A
Port
VGA In
Port
Audio
In Port
HDMI
In Port
DisplayPort
In Port
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | nincs kategorizálva |
| Modell: | MOD4AVHD |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com MOD4AVHD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva StarTech.com
StarTech.com PS2UTPEXT Útmutató StarTech.com RKPNLTL2U Útmutató StarTech.com PCI2S485LP Útmutató StarTech.com CMVER20UF Útmutató StarTech.com CB1394 Útmutató StarTech.com GLCSXMM10PST Útmutató StarTech.com N6PATC10MYL Útmutató StarTech.com USB2001EXT2NA Útmutató
Népszerű termékek – nincs kategorizálva
StarTech.com PEX1S953LP Útmutató StarTech.com DRW150SCSIBK Útmutató StarTech.com WALL-WORKSTATION-S Útmutató