Használati útmutató StarTech.com P5Q4A-USB-CARD
Oldalak 4 Engels nincs kategorizálva
Olvassa el ingyen online a(z) StarTech.com P5Q4A-USB-CARD használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 12 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
For additional self-service support options and community forums, please visit: www.StarTech.com/support
Revision: August 9, 2024
Quick-Start Guide
Product ID
P5Q4A-USB-CARD
FeatureFunction
1Full-Prole Bracket
• Secures the onto the PCIe USB Card Host Computer
Case
2USB Type-A Ports (x4)
• Connects peripheral devicesUSB-A
• Supports up to 5Gbps Speeds
3
PCI Express p1-x4
Connector
• Insert into a on the PCI Express SlotHost Computer
• Supports PCIe 2.0
4LP4 Power Connector
• (Optional) Connect a from theLP4 PowerCable Host
Computer’s Power Supply
• Only needed if the can’t supply enough powerPCIe Slot
4
SATA Power
Connector
• (Optional) Connect a from theSATA PowerCable Host
Computer’s Power Supply
• Only required if the power is insucientPCIe Slot
4-Port USB 3.2 (5Gbps) Card - 4 Dedicated Controllers
Package Contents
• PCIe USB Card x 1
• Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit:www.StarTech.com/P5Q4A-USB-CARD
• Phillips head screwdriver
Installation
Install the PCI Express Card
WARNING!
Static electricity can cause severe damage to PCI Express cards. Ensure proper grounding
before opening the computer case or touching the PCI Express card. Use an Anti-Static
Strap when installing any computer component. If an Anti-Static Strap isn’t available,
discharge built-up static electricity by touching a large grounded metal surface for
several seconds. Handle the PCI Express card by its edges, avoiding contact with the gold
connectors.
1. Turn o the and any that are connected to it (for Computer Peripheral Devices
example, , , etc.).PrintersExternal Hard Drives
2. Unplug the from the back of the .Power Cable Computer
3. Disconnect any that are connected to the .Peripheral Devices Computer
4. Remove the from the . Consult the documentation that came Cover Computer Case
with the for details about how to do this safely.Computer
5. Locate an open and remove the corresponding PCI Express SlotSlot Cover Plate
from the back of the . Consult the documentation that came with the Computer Case
Computer for details about how to do this safely. This card works in PCI Express x4, x8,
or p1-x16 slots.
6. Gently insert the into the open and fasten the PCI Express CardPCI Express Slot
BracketComputer Case to the back of the .
7. (Optional) Connect a or from the LP4 SATA Power CableHost Computer’s Power
SupplyLP4 SATA Power ConnectorPCIe USB to the or , located on the rear of the
Card.
Note: It’s recommended to connect the LP4 or Sata Power to ensure sucient power is
provided to the card and to each USB port.
*Product may vary from image
1
4
3
2
5
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | nincs kategorizálva |
| Modell: | P5Q4A-USB-CARD |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com P5Q4A-USB-CARD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva StarTech.com
StarTech.com ST122LGB Útmutató StarTech.com PEXUSB3S11 Útmutató StarTech.com U01043-USB-EXTENDER Útmutató StarTech.com 4P-SATA-M2-ADAPTER Útmutató StarTech.com PS4C3IA3-USB-C-CARD Útmutató StarTech.com 2P6FFC-USB-SERIAL Útmutató StarTech.com PEX4SFF8639U3 Útmutató StarTech.com 2S232422485-PC-CARD Útmutató
Népszerű termékek – nincs kategorizálva
StarTech.com PEX1S953LP Útmutató StarTech.com DRW150SCSIBK Útmutató StarTech.com WALL-WORKSTATION-S Útmutató