Használati útmutató StarTech.com PEX40GQSFPI
Oldalak 2 Engels hálózati kártya/adapter
Olvassa el ingyen online a(z) StarTech.com PEX40GQSFPI használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 27 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: December 17, 2018 11:00 AM
Product Diagram (PEX40GQSFPI)
PortFunction
1Mounting Bracket
• Used to mount the Network Card in a full-
prole computer system.
2QSFP+Slot• Used to connect a Network Device.
3Link LED/Activity LED
• Solid Green: The Network Card is connected
to a Network.
• Flashing: Indicates activity.
4PCIe p1-x8 Connector
• Used to connect the Network Card to a
Computer.
Requirements
For the latest requirements, please visit www.startech.com/PEX40GQSFPI.
• PCI Express® Enabled Computer with an PCI Express Slot (x 8 or x 16)
• One 40G QSFP+ Transceiver Module (sold separately)
• Module or Direct Attach Cable (sold separately)
• Operating Systems:
• Windows® 10, 8.1, 8, and 7
• Windows Server® 2016, 2008 R2, 2012
• Linux® Kernel 2.6.32 to 4.1.1.x (64-bit) LTS Versions
• Phillips Head Screwdriver
1-Port QSFP+ Server Network Card | PCIe
(Optional) Installing the Low Prole Bracket
To mount the Network Card in a low-prole computer system, replace the pre-installed
Full-Prole Mounting Bracket with the included Low-Prole Mounting Bracket.
1. Use a Phillips Head Screwdriver to remove the Bracket Screws (2) from the
Network Card.
2. Remove the Full-Prole Bracket from the Network Card.
3. Line up the Low-Prole Bracket with the Bracket Holes on the back of the
Network Card.
4. Insert the Bracket Screws (2) that you removed in Step 1 and tighten them in place.
Installing the Network Card
Note: Network cards can be severely damaged by static electricity. Make sure that
you’re properly grounded before you open your computer case or touch the PCIe card.
1. Turn o the Computer and any connected Devices (e.g. printers, etc.).
2. Disconnect any connected Devices and unplug the power cable from the
Computer.
3. Open the Computer Case. For more information, consult the user manual that came
with the Computer.
4. Locate a PCI Express p1-x8 or x16 Slot and remove the corresponding metal cover
plate from the back of the Computer Case.
5. Gently insert the PCIe p1-x8 Connector on the Network Card into the PCI Express
Slot on the Computer.
6. Use a Computer Case Screw (sold separately) to fasten the Bracket on the Network
Card to the back of the Computer Case.
7. Place the cover back onto your Computer Case.
8. Insert a 40G QSFP+ Transceiver Module into the QSFP+ slot on the Network Card.
2
3
4
1
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | hálózati kártya/adapter |
| Modell: | PEX40GQSFPI |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com PEX40GQSFPI, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók hálózati kártya/adapter StarTech.com
StarTech.com ST5GPEXNB Útmutató StarTech.com NETRS232_1 Útmutató StarTech.com USB3000WN2X2 Útmutató StarTech.com PEX16S952LP Útmutató StarTech.com USB2106S Útmutató StarTech.com ST10GSPEXNDP2 Útmutató StarTech.com EOC110R Útmutató StarTech.com PEX20000SFPI Útmutató
Összes StarTech.com hálózati kártya/adapter használati útmutató
Népszerű termékek – hálózati kártya/adapter
StarTech.com P011GI-NETWORK-CARD Útmutató StarTech.com PEX1000MMSC2 Útmutató StarTech.com NIC PCI Express Gigabit Card Útmutató