Használati útmutató StarTech.com PR12GIP-NETWORK-CARD

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com PR12GIP-NETWORK-CARD (2 oldal) a hálózati kártya/adapter kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.6 csillagra

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: October 12, 2023

Product ID

PR12GIP-NETWORK-CARD

Port/LED/ConnectorFunction

1Bracket

• Secures the card to the Host Computer Case

• The comes pre-installedFull Prole Bracket

• The is included Low Prole Bracket

2

Power Over Ethernet

(PoE) LED Indicator

• Solid Green: PoE has been negotiated and power is

being supplied to the Powered Device

• O: No power output has been negotiated

3Ethernet Port

• Connect an to the Ethernet CableNetwork Card

• Supports 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps

• Supports and IEEE 802.3atIEEE 802.3af

• RightLED Indicator Link Speedis

• Solid Green: 2.5Gbps

• Solid Amber: 1Gbps

• O: 10/100Mbps

• LeftLED Indicator Link Statusis

• Solid Green: Active link

• Flashing Green: Activity

1-Port PCIe 2.5GBase-T Ethernet PoE Network Adapter Card - Intel

4PCIe 2.0 p1-x1 Connector• Insert into a on the PCI Express SlotHost Computer

5

SATA Power

Connector

• Connect from the SATA PowerHost Computer’s

Power Supply

• Required to enable Power over Ethernet (PoE)

Package Contents

• Network Card x 1

• Low Prole Bracket x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit: www.StarTech.com/PR12GIP-NETWORK-CARD

• Host Computer with an available PCI Express 2.0 or greater slot (x1, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING! Static Electricity PCI Express Cardscan severely damage. Ensure that

you are adequately before you open your or touch GroundedHost Computer Case

the . You should wear an oruseanPCI Express CardAnti-Static Strap Anti-Static

Mat Anti-Static Strap when installing any Host Computer component. If an isn’t

available, discharge any built-up static electricity by touching a large Grounded

Metal SurfacePCI Express Card for several seconds. Only handle the by its edges and

don’t touch the gold connectors.

1. Turn o the and any that are connected to it Host Computer Peripheral Devices

(e.g. printers, external hard drives, etc.).

2. Unplug the from the back of the .Power Cable Host Computer

3. Disconnect any that are connected to the .Peripheral Devices Host Computer

4. Remove the from the . Cover Host Computer Case

Note: Consult the documentation that came with the for details Host Computer

about doing this safely.

5. Locate an open and remove the corresponding PCI Express SlotSlot Cover Plate

from the back of the . Host Computer Case

4

1

2

3

5

Termékspecifikációk