Használati útmutató StarTech.com ST1030USBM
Oldalak 4 Engels usb-hub
Olvassa el ingyen online a(z) StarTech.com ST1030USBM használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 23 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Instruction manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 07/23/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/ST1030USBM.
Packaging contents
• 1 x 10-port industrial USB 3.0 hub
• 1 x USB 3.0 host cable
• 1 x DIN rail mounting kit
• 1 x terminal block (2-wire)
• 1 x instruction manual
System requirements
• USB-enabled host computer with an available USB 3.0 port
• 2-wire 7~24V DC power source
• OS independent
Note:This hub can only be used with terminal block power input. A
standard AC power adapter is not included or supported.
Operating system requirements are subject to change. For the latest
requirements, please visit .www.startech.com/ST1030USBM
ST1030USBM
10-Port Industrial USB 3.0 Hub - ESD and Surge Protection
*actual product may vary from photos
Product diagram
Front view
2-wire terminal block included
(7~24V DC input)
Power LED
USB 3.0 host port
USB 3.0 hub ports
About USB 3.0 and USB 3.1 Gen1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5 Gbps.
Installation
You must use the terminal block with your external power source to
ensure sucient power is delivered to each USB 3.0 port.
Connect the hub to a terminal block power source
1. If the terminal block connector is already inserted into the hub,
remove it from the hub.
2. Loosen the two screws on the terminal block connector using a
small Phillips or at-head screwdriver.
3. Connect the power and ground wires from your DC power source
to the proper terminal block connectors and fasten the screws.
The terminals are marked on the hub’s casing.
Note: Ensure that the polarity of the input power is correctly
matched with the terminal block pins to ensure proper function (see
the diagram below).
4. Reinsert the terminal block into the hub. The Power LED on the
hub should light up green.
+7~24V
GND
+
-
Connect the hub to your host computer and
peripherals
1. Connect the hub to an available USB port on your computer
using the provided USB 3.0 A - B cable. Your computer’s operating
system should detect and automatically install the hub.
2. Connect your USB peripherals to the USB 3.0 hub ports.
Note: If the hub is connected to a USB 2.0 host port, it will operate at
USB 2.0 speeds.
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | usb-hub |
| Modell: | ST1030USBM |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com ST1030USBM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók usb-hub StarTech.com
StarTech.com ST4202USB Útmutató StarTech.com ST4300MINU3B Útmutató StarTech.com ST4300USB3 Útmutató StarTech.com ST7C51224EU Útmutató StarTech.com ST4200USBM Útmutató StarTech.com ST7300USB3B Útmutató StarTech.com ST4300USB3EU Útmutató StarTech.com ST4300MINU3W Útmutató
Összes StarTech.com usb-hub használati útmutató
Népszerű termékek – usb-hub
StarTech.com 5G16AINDS-USB-A-HUB Útmutató StarTech.com HB30C4AFPD Útmutató StarTech.com HB31C2A2CME Útmutató