Használati útmutató StarTech.com UNIRAILS3U
Oldalak 2 Engels nincs kategorizálva
Olvassa el ingyen online a(z) StarTech.com UNIRAILS3U használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 28 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: April 8, 2024 3:55 PM
For additional self-service support options and community forums, please visit: www.StarTech.com/support
Product ID
UNIRAILS1U / UNIRAILS2U / UNIRAILS3U - Revision 02 or above
ComponentFunction
1
Front Rail - Rack Rail
Assembly
• Attaches onto the Front Mounting Posts of a Rack
• Slide along the Middle Sliding Rail to adjust depth
2
Middle Sliding Rail -
Rack Rail Assembly
• Fully assembled with Front and Rear Rails
• Loosen Connecting Screws to adjust the depth of the
Front and Rear Rails
3
Rear Rail - Rack Rail
Assembly
• Attaches onto the Rear Mounting Posts of a Rack
• Slide along the Middle Sliding rail to adjust depth
4Cross Braces
• Supports the weight of 19in Non-Rackmount Equipment
• Attaches to the Left and Right Rack Rail Assemblies
5
Cable Management
Plate
• End plate with Cable Management Holes
• Prevents Equipment from sliding o the rear of the Rack
Rails
1U/2U/3U Fixed 19” Adjustable Depth Universal Server Rack Rails
Information
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit:
www.StarTech.com/UNIRAILS1U
www.StarTech.com/UNIRAILS2U
www.StarTech.com/UNIRAILS3U
How to Identify the LOT Code Revision Number
The Revision Number (Rev #) appears as the fth and sixth digits of the LOT code,
located on the sticker axed to the product and its packaging. If the LOT code sticker
is missing, the product is Rev 01. Refer to the specic Product ID page on www.
StarTech.com to download the manual for Revision 01.
Requirements
• Phillips Head Screwdriver
• (Optional) Cage Nut Tool
Package Contents
UNIRAILS1UUNIRAILS2UUNIRAILS3U
1 - Set Universal Rack Rails
6 - Cross Brace Screws
8 - M5 Panel Screws
8 - M5 Cage Nuts
1 - M5 Wrench
1 – Quick-Start Guide
1 - Set Universal Rack Rails
6 - Cross Brace Screws
16 - M5 Panel Screws
16 - M5 Cage Nuts
1 - M5 Wrench
1 – Quick-Start Guide
1 - Set Universal Rack Rails
6 - Cross Brace Screws
14 - M5 Panel Screws
14 - M5 Cage Nuts
1 - M5 Wrench
1 – Quick-Start Guide
Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood
before assembling and using this product. Before adding equipment to this product,
ensure this product has been properly mounted. Never operate this product if parts are
missing or damaged. Ensure the weight of the equipment does not exceed the weight
capacity of this product. If the weight capacity is exceeded, personal injury or damage
to the equipment is possible. These products can support the following weights:
UNIRAILS1U: up to 55.1 lb (25 kg)
UNIRAILS2U: up to 99.8 lb (45.2 kg)
UNIRAILS3U: up to 214.5 lb (97.3 kg)
All four mounting points must be properly secured to each of the posts on a four-post
rack. Never exceed the maximum mounting depth specication for this shelf: 41.5in
(1055mm)
*Product may vary from image
5
3
1
2
4
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | nincs kategorizálva |
| Modell: | UNIRAILS3U |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com UNIRAILS3U, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva StarTech.com
StarTech.com IES5100 Útmutató StarTech.com RKLCDBKT Útmutató StarTech.com PEX1S552LP Útmutató StarTech.com Professional ATX2PW430PRO Útmutató StarTech.com HB30C4ABW Útmutató StarTech.com CMDUCT1UX2 Útmutató StarTech.com Professional ATX2PW400Pro Útmutató StarTech.com ATX2POWR400E Útmutató
Népszerű termékek – nincs kategorizálva
StarTech.com PEX1S953LP Útmutató StarTech.com DRW150SCSIBK Útmutató StarTech.com WALL-WORKSTATION-S Útmutató