Használati útmutató Steelseries Free Mobile

Steelseries vezérlő Free Mobile

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Steelseries Free Mobile (8 oldal) a vezérlő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
STEELSERIES FREE MOBILE
WIRELESS CONTROLLER
USER GUIDE
2
INTRODUCTION
Thank you for choosing the SteelSeries Free Mobile Controller! This controller is designed by SteelSeries, a dedicated
manufacturer of innovative professional gaming gear and mobile gaming accessories.
This user guide is designed to familiarize you with all aspects of our controller, its setup, and its usage. We hope that it will be of
use to you. If there are any questions that are not answered or clarified in this user guide, please refer to our website:
http://faq.steelseries.com
CHARGING THE CONTROLLER
Prior to using your SteelSeries Free for the first time, it is recommended that you charge the controller for 2 hours by plugging in
the USB cable (provided in the box) – plug one end of the cable in your Free and plug the other end into a powered USB port.
Remember, you can use your Free while it’s charging.
Your FREE controller is built with a Lithium ION rechargeable battery. During charging, a red and white LED will give you the
charging status:
• While the FREE Controller is charging, the red light will stay on
• When the FREE Controller is fully charged, the red light will turn off
• Low battery Indicator – The white light will flash very quickly and repeatedly
GENERAL INFORMATION
Modes
The SteelSeries Free Mobile Wireless Controller was designed with cross-platform play in mind. The Free Controller ships with two
“modes”.
Gamepad Mode (default): Lets you play games on Android
TM
devices, PC’s and Mac OSX®
Arcade Mode: Lets you play games on iOS® that support iCade controls.
To toggle between the two modes, press “A+B” buttons simultaneously while the controller is powered off. The Free Controller will
remember the last mode you were in on standard power up (holding “A” for 3 seconds).
3
Illumination Patterns
When the Free is on, the white LED next to the “A” button flashes in a specific pattern to inform you of the current mode and
connection status.
• Gamepad Mode – the white LED will blink once, this will repeat (single blink)
• Arcade Mode – the white LED will blink twice, this will repeat (double blink)
• Disconnected – white light will blink (once or twice, depending on your current mode) every second
• Connected – white light will blink (once or twice, depending on your current mode) every 3 seconds
For example, if your Free is currently in HID Gamepad Mode (the default) and it is not paired to a device yet, it will blink (one quick
blink) once every second. Once you pair it to a device, the lighting behavior will change to blinking (one quick blink) every three
seconds.
On the other hand, if your FREE is in Arcade Mode and it is not paired to your iOS device yet, it will blink (two quick blinks) once
every second. Once you pair it to your iOS device, the lighting behavior will change to blinking (two quick blinks) every three
seconds.
IF YOU ARE ASKED TO ENTER A PAIRING CODE FOR YOUR iOS DEVICE, REFER TO THESE KEY MAPPINGS
- Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
- Android
TM
is a trademark of Google Inc.
- iPhone®, iPod touch®, iPad® and Mac®, iOS® are trademarks of Apple Inc., registered in the U.S. and other countries.
CONNECTING ON ANDROID
TM
(TABLETS/PHONES)
If this is your first time turning on your Free, hold down the “A” button for 3 seconds to turn on the controller. You’ll know the
controller is on because the white light will start flashing. Please note that the controller will remember the last mode you were in.
If you’ve used the Free on an iOS® device previously, you will need to switch to “Gamepad Mode” by pressing “A+B” buttons for 3
seconds while the controller is off. If your Free is properly paired and connected, the white light will be in a “single blink” pattern.
Enable Bluetooth® on your Android
TM
device by going to the Settings menu, turn on Bluetooth®, then tap “Search for Devices” and
look for the “Zeemote: SteelSeries Free” in the device’s list. Select the controller and your Free should pair effortlessly. If a code
prompt is displayed, enter “0000” to pair your device.
Open up a compatible game, navigate to the in-game controller settings menu and select the Gamepad/Controller option (Exact
name varies from game to game). If the game supports remapping, feel free to do so from the in-game controller settings menu. If
you don’t know if the game is controller compatible, go to www.steelseries.com/free/android to find a list of compatible games and
much more.

Termékspecifikációk

Márka: Steelseries
Kategória: vezérlő
Modell: Free Mobile

Szüksége van segítségre?

Ha segítségre van szüksége Steelseries Free Mobile, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vezérlő Steelseries

Steelseries

Steelseries Stratus Duo Útmutató

1 Január 2025
Steelseries

Steelseries Free Mobile Útmutató

27 Július 2024
Steelseries

Steelseries Stratus Útmutató

10 Július 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

Sonance

Sonance VC60R Útmutató

2 Április 2025
Trust

Trust Mylox GXT 735G Útmutató

30 Március 2025
Trust

Trust Mylox GXT 735 Útmutató

30 Március 2025
American DJ

American DJ STAGE SETTER-8 Útmutató

30 Március 2025
American DJ

American DJ DP-DMX20L Útmutató

30 Március 2025
Visual Productions

Visual Productions TimeCore Útmutató

30 Március 2025
PCE Instruments

PCE Instruments PCE-RE22T Útmutató

28 Március 2025
Metronic

Metronic Zap 3 495383 Útmutató

27 Március 2025
Turtle Beach

Turtle Beach Recon Útmutató

27 Március 2025
DJI

DJI Motion Controller Útmutató

14 Január 2025