Használati útmutató Steren MC14017B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Steren MC14017B (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak.

 Semiconductor Components Industries, LLC, 2000

March, 2000 – Rev. 3

1Publication Order Number:

MC14017B/D

The MC14017B is a ve–stage Johnson decade counter with

built–in code converter. High speed operation and spike–free outputs

are obtained by use of a Johnson decade counter design. The ten

decoded outputs are normally low, and go high only at their

appropriate decimal time period. The output changes occur on the

positive–going edge of the clock pulse. This part can be used in

frequency division applications as well as decade counter or decimal

decode display applications.

•Fully Static Operation

•DC Clock Input Circuit Allows Slow Rise Times

•Carry Out Output for Cascading

•Divide–by–N Counting

•Supply Voltage Range = 3.0 Vdc to 18 Vdc

•Capable of Driving Two Low–power TTL Loads or One Low–power

Schottky TTL Load Over the Rated Temperature Range

•Pin–for–Pin Replacement for CD4017B

•Triple Diode Protection on All Inputs

MAXIMUM RATINGS (Voltages Referenced to VSS) (Note 2.)

SymbolParameterValue Unit

VDD DC Supply Voltage Range–0.5 to +18.0V

V

in , Vout Input or Output Voltage Range

(DC or Transient)

–0.5 to VDD + 0.5V

I

in , Iout Input or Output Current

(DC or Transient) per Pin

±10 mA

PDPower Dissipation,

per Package (Note 3.)

500 mW

TAAmbient Temperature Range–55 to +125°C

Tstg Storage Temperature Range–65 to +150°C

TLLead Temperature

(8–Second Soldering)

260 °C

2.Maximum Ratings are those values beyond which damage to the device

may occur.

3.Temperature Derating:

Plastic “P and D/DW” Packages: – 7.0 mW/ C From 65C To 125C

This device contains protection circuitry to guard against damage due to high

static voltages or electric elds. However, precautions must be taken to avoid

applications of any voltage higher than maximum rated voltages to this

high–impedance circuit. For proper operation, V

inand Vout

should be constrained

to the range VSS (Vin or Vout) VDD.

Unused inputs must always be tied to an appropriate logic voltage level (e.g.,

either VSS or VDD). Unused outputs must be left open.

http://onsemi.com

A= Assembly Location

WL or L= Wafer Lot

YY or Y= Year

WW or W= Work Week

DevicePackage Shipping

ORDERING INFORMATION

MC14017BCP PDIP–162000/Box

MC14017BD SOIC–1648/Rail

MC14017BDR2SOIC–162500/Tape & Reel

1.For ordering information on the EIAJ version of the

SOIC packages, please contact your local ON

Semiconductor representative.

MARKING

DIAGRAMS

1

16

PDIP–16

P SUFFIX

CASE 648

MC14017BCP

AWLYYWW

SOIC–16

D SUFFIX

CASE 751B

1

16

14017B

AWLYWW

SOEIAJ–16

F SUFFIX

CASE 966

1

16

MC14017B

AWLYWW

MC14017BFSOEIAJ–16See Note 1.

MC14017BFELSOEIAJ–16See Note 1.

Termékspecifikációk