Használati útmutató Strong SRT ANT 30

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Strong SRT ANT 30 (4 oldal) a TV antenna kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.5 csillagra

English

PART 1

1.0 INTRODUCTION

Thank you for purchasing the STRONG SRT ANT 30 DVB-T/T2 antenna. This antenna has been specially

designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial Receiver (DVB-T/T2)

and is specially designed for indoor use.

This antenna has a built-in low noise amplier that amplies the received signals for better performance. The

stylish housing design will t the antenna perfectly to your Digital TV and digital home cinema.

We recommend that you carefully read this user manual before you install the antenna. This will help you to

get the best performance out of your antenna.

Features

Designed for indoor reception of DVB-T/T2 signals

Built-in LTE lter for better reception

Compatible with DVB-T/T2 receivers supporting active antenna output (5 V)

Enhanced technology and ecological housing materials

Suitable for vertical and horizontal reception by universal antenna holder

Built-in Low Noise Amplier technology

2.0 PACKAGE CONTENT

Before starting your installation, please check the contents.

1. Antenna main unit (cable attached)

2. Standing unit

3. Power adaptor

4. User manual

123

3.0 SPECIFICATIONS

Frequency Range UHF: 470 ~ 790 MHz

Active Antenna Gain UHF: max. 12 dBi

Isolation > 15 dB (870 MHz)

Noise Figure (Max.) < 3 dB

O/P Return Loss < -6 dB

RF Output Impedance 75 Ohm

RF Coaxial Cable IEC Male / 180 cm p1-x1 / 1.5 C-2 V

Power Adaptor AC Input: 230 V / DC Output: 12 V / 250 mA

4.0 INSTALLATION

Powering the antenna with the power adaptor:

1. Take out the main unit and check the accessories.

2. Take the coaxial cable that is attached to the antenna to your Digital Terrestrial Receiver (or Digital TV).

3. Take out the power adaptor. Connect it to the DC input of the antenna and plug the AC end to an AC

outlet. (Please only use the supplied power adaptor.)

03 Feb 2021 17:40

Termékspecifikációk