Használati útmutató Sun Joe BDL-A0067
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sun Joe BDL-A0067 (48 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 10.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/48
© 2022 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 24V-HCS-LTE-P1 Form No. SJ-24V-HCS-LTE-P1-880E-M
R
CORDLESS PRUNING SAW
24V MAX* | 2.0 Ah | 5-INCH
1
EN
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, re
and/or serious injury. Save all warnings and instructions for
future reference.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
Intended Use
This cordless prunning saw was designed and manufactured
for trimming and pruning tree limbs and branches and for
cutting smaller logs up to recommended 4.5 inch
(11.4 cm), not to exceed a max. cut of 5.5 in. (14 cm) in
diameter depending on type of wood. All of the wooden
objects intended to be cut with this pruning saw should be no
thicker than the guide bar's maximum cutting capabilities.
Any other use diering from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Improper use of the machine
will invalidate the warranty, relieve the manufacturer from all
liabilities. The user will consequently be liable for all and any
damage or injury to himself/herself or others.
General Power Tool Safety
Warnings
mWARNING! Read all safety warnings, instructions,
illustrations and specications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all warnings and
instructions for future reference.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electric Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools – Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts
– Damaged or entangled cords increase the risk of electric
shock
4. When operating a power tool outdoors, use an
extension cord suitable for outdoor use – Use of a cord
suitable for outdoor use reduces the risk of electric shock.
5. If operating a power tool in a damp location is
unavoidable, use a RESIDUAL CURRENT DEVICE
(RCD) protected supply – Use of an RCD reduces the
risk of electric shock
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Use personal protective equipment. Always wear
eye protection – Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is
in the o-position before connecting battery pack,
Termékspecifikációk
| Márka: | Sun Joe |
| Kategória: | Fűrészgép |
| Modell: | BDL-A0067 |
Szüksége van segítségre?
Ha segítségre van szüksége Sun Joe BDL-A0067, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Fűrészgép Sun Joe
12 Január 2025
7 Január 2025
31 December 2025
31 December 2025
14 Szeptember 2024
20 Augusztus 2024
17 Augusztus 2024
16 Augusztus 2024
13 Augusztus 2024
13 Augusztus 2024
Útmutatók Fűrészgép
- Fűrészgép Kraftronic
- Fűrészgép Herkules
- Fűrészgép Lux Tools
- Fűrészgép Greenworks
- Fűrészgép Baumr-AG
- Fűrészgép Westfalia
- Fűrészgép Pattfield
- Fűrészgép Robust
- Fűrészgép Proviel
- Fűrészgép Ergofix
- Fűrészgép Kress
- Fűrészgép Gude Pro
- Fűrészgép Tacklife
- Fűrészgép Maestro
- Fűrészgép Craftsman
Legújabb útmutatók Fűrészgép
3 Április 2025
3 Április 2025
2 Április 2025
1 Április 2025
1 Április 2025
1 Április 2025
1 Április 2025
1 Április 2025
30 Március 2025
30 Március 2025