Használati útmutató SurgeX SA-20-AR
SurgeX
nincs kategorizálva
SA-20-AR
Olvassa el alább 📖 a magyar nyelvű használati útmutatót SurgeX SA-20-AR (27 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/27

© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com 0
Axess-Ready Standalone
Surge Elimination & Power Conditioning
SA-20-AR
Firmware Version: 1.20.261
Software Version: 2.00.03
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | UM-SA-20-AR-Rev-C

SA-20-AR User Manual
______________________________________________________________________________
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com 1
I. INTRODUCTION 2
II. INSTALLATION 4
1. PHYSICAL ...................................................................................................................................... 4
2. ETHERNET CONNECTION ............................................................................................................... 4
3. AC POWER CONNECTIONS ............................................................................................................ 4
III. LED INDICATORS 4
IV. INITIAL SET-UP 5
DEVICE MANAGEMENT UTILITY (DMU) ...................................................................................................... 5
SETTING THE IP ADDRESS ............................................................................................................................ 6
V. WEB SERVER 8
PASSWORD .................................................................................................................................................... 8
CONTROL AND STATUS PAGE ....................................................................................................................... 8
SETUP PAGES................................................................................................................................................. 9
▪ DEVICE .............................................................................................................................................. 9
▪ NETWORK ....................................................................................................................................... 10
▪ Advanced Network……………………………………………………………………….11
▪ AUTOPING....................................................................................................................................... 12
▪ SCHEDULE ....................................................................................................................................... 14
▪ PASSWORDS .................................................................................................................................... 15
VI. COMMAND LINE INTERFACE (CLI) PROTOCOL 16
OVERVIEW................................................................................................................................................... 16
PROMPTS ..................................................................................................................................................... 16
CONTROL COMMANDS ................................................................................................................................ 16
DEVICE COMMANDS ................................................................................................................................... 16
NETWORK COMMANDS ............................................................................................................................... 17
AUTOPING COMMANDS .............................................................................................................................. 18
USER COMMANDS ....................................................................................................................................... 18
EVENT COMMANDS ..................................................................................................................................... 19
VII. DXP PROTOCOL 20
OVERVIEW................................................................................................................................................... 20
HELLO HANDSHAKE .................................................................................................................................... 20
DXP PACKET ............................................................................................................................................... 21
COMMANDS ................................................................................................................................................. 22
DESCRIPTORS .............................................................................................................................................. 22
PAYLOADS ................................................................................................................................................... 24
VIII. FIRMWARE UPGRADES 25
IX. RESET BUTTON 25
X. SPECIFICATIONS 26

SA-20-AR User Manual
______________________________________________________________________________
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com 2
I. INTRODUCTION
The SurgeX
®
SA-20-AR is a network attached, IP addressed, web-controlled AC surge
eliminator and power conditioner. The SA-20-AR may be used to switch up to 20A at 120V.
The simple web server structure allows basic control of two outlets. The extensive programming
and setup capabilities are accessed by a web browser, through a Device Management Utility
(DMU), or through a Command Line Interface (CLI).
• The SA-20-AR features SurgeX
®
Advanced Series Mode
®
surge elimination and
Impedance Tolerant EMI/RFI filtering.
• Remote reboot any device: monitors, routers, servers, kiosks, etc. The remote device need
not be network attached.
• Conserve energy by powering down equipment when not in use.
• Telnet access uses the Command Line Interface (CLI) structure and syntax to completely
configure and control the SA-20-AR. This Axess Ready (AR) device also supports the
DxP protocol, which allows software developers to integrate the unit into custom
applications.
• Up to 2 systems can be continuously monitored with AutoPing, with automatic power
control upon loss of contact. Reboot crashed systems, or provide auto power-up or -down
for environmental controls and notification systems.
• The SA-20-AR utilizes 2 levels of password security, with only the administrative
account having access to setup and configuration.
Termékspecifikációk
Márka: | SurgeX |
Kategória: | nincs kategorizálva |
Modell: | SA-20-AR |
Szüksége van segítségre?
Ha segítségre van szüksége SurgeX SA-20-AR, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva SurgeX
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
3 Szeptember 2024
9 Június 2024
9 Június 2024
9 Június 2024
9 Június 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Zipper
- nincs kategorizálva Redmond
- nincs kategorizálva Air Guard
- nincs kategorizálva Badiona
- nincs kategorizálva Airlive
- nincs kategorizálva Sagem
- nincs kategorizálva Schoeps
- nincs kategorizálva Liam&Daan
- nincs kategorizálva Logitech
- nincs kategorizálva DeepCool
- nincs kategorizálva Jotul
- nincs kategorizálva Baby Trend
- nincs kategorizálva Plastkon
- nincs kategorizálva Koenic
- nincs kategorizálva Luxli
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025