Használati útmutató Synco Cmic-V10

Synco mikrofon Cmic-V10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Synco Cmic-V10 (2 oldal) a mikrofon kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.
Microphone CMic-V10 User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
1. The Use of Wind Mu󽗈
Product Introduction
Operations
It is highly recommended that you set the recording level on your camera
quite low, 1/2 or 1/3 of it at 󽗉rst, and tailor your levels to just about
environment and recording device.
① High Frequency Boost
② High-pass Filter
③ Front Attenuator
Speci󽗉cations
1. Polar Pattern: Hyper-cardioid
2. The Use of Mic Clip
The 5/8” screw and 3/8” screw accessible mic clip is for attaching accessories
like boompole, mic stand.
3. The Use of Microphone
Connect the mic with the device via the XLR cable.
5/8” screw 3/8” screw

Termékspecifikációk

Márka: Synco
Kategória: mikrofon
Modell: Cmic-V10

Szüksége van segítségre?

Ha segítségre van szüksége Synco Cmic-V10, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek