Használati útmutató TacTic TACJ2005

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TacTic TACJ2005 (4 oldal) a Rádióvezérlésű játékok kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.0 csillagra

The AnyLink2 SLT 2.4GHz

Radio Adapter can greatly

expand a transmitter’s

versatility, allowing it to be

used with a huge variety

of fl ight models, including

Tx-R

™

Transmitter-Ready

™

aircraft (including Select Scale and Micro Tx-R models). AnyLink2 is

capable of full range, to control any size aircraft.

Read this manual in its entirety before use! Damage resulting

from misuse or modifi cation will void your warranty.

ITEMS INCLUDED

(1) AnyLink2 2.4GHz Radio Adapter with 1S LiPo Battery

(1) Cable A – JR®, Spektrum®, Graupner®

(1) Cable B – Futaba® Square

(1) Cable C – Spektrum, Hitec®

(1) TC10 USB Charger

(2) Hard Locking Adhesive Strips

(1) Instruction sheet

COMPATIBLE TRANSMITTERS

AND RECEIVERS

AnyLink2 can link virtually any brand transmitter (Tx) to any Tactic brand

2.4GHz receiver (Rx) such as the TR624 or TR625. Transmitters must be

equipped with a functioning trainer jack, and can originally be designed

for use on 72MHz, 2.4GHz, FM, PCM, etc. Go to www.tacticrc.comfor a

comprehensive Tx compatibility chart. AnyLink2 is not compatible with

non-Tactic brand receivers not having SLT technology.

TX CABLE

See the chart below to determine the cable needed to connect AnyLink2 to

the Tx. Three cables are included, for many Futaba, Hitec, JR, Spektrum,

and Graupner brand radios.

This chart is current as of the date of the printing of this manual. Check

www.tacticrc.comfor the most updated compatibility chart. Transmitters

not listed may or may not be compatible with AnyLink2. See your local

hobby retailer for optional cables for other radio types:

TACM0013 AnyLink2 Cable Futaba/Hitec Round

TACM0014 AnyLink2 Cable Airtronics SD-Series

TACM0015 AnyLink2 Cable Airtronics 5-Pin Round

IMPORTANT:For some transmitters, connecting a cable to the

trainer jack will automatically cause the Tx logic circuitry to turn

on. When not in use, make sure to disconnect the cable from trainer jack

to prevent the Tx battery from discharging completely.

ANYLINK2

TM

AnyLink2 Transmitter Compatibility Chart

ANYLINK2

MODE

BRAND MODELCABLE

Futaba®

4YF (72M, 2.4G), 4YBF, 6EX, TJ, 7C, 8FG, 8J, 9C, 10C, 14SG; (12FG, 12Z, 14MZ, 18MZ

>)See note page 2*

4VF, 5U, 6A, 6DA, 6H, 6X, 6YF, 6YG, 7U, 7NFK, 8U, 9Z

Hitec ®

Optic 5, Optic 6 Sport, and Eclipse 7 (all on 2.4GHz), Aurora 9

Neon, Flash 4sx, Flash 5, Flash 5sx, Focus 4, Focus 6, Laser 4, Laser 6, Optic 5 (72M),

Optic 6 (72M, 2.4G), Eclipse 7 (72M), Prism 7, Prism 7X

Tower Hobbies

®

4FM, 6FM

4TH, 6XM

Graupner ®

MX-12, MX-16

Walkera ®

Devo 7, Devo 8S

Airtronics ®

SD-5G, SD-6G, SD-10G

Vanguard 4FM, 6FM, RD6000 Sport, RD6000 Super, RDS8000, Radiant 6FM

Spektrum

®

DX4e, DX5e, DX6, DX7, DX7s, DX8, DX9, DX10T, DX18

DX6i

JR ®

All with trainer/DSC jack

B

(Included)

B

(Included)

A

(Included)

A

(Included)

A

(Included)

C

(Included)

C

(Included)

C

(Included)

D

(TACM0013)

D

(TACM0013)

D

(TACM0013)

E

(TACM0014)

F

(TACM0015)

F

F

J

S

J

S

A

H

F

F

H

A

A

1

Termékspecifikációk