Használati útmutató Tanita D-1000

Tanita mérleg D-1000

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tanita D-1000 (3 oldal) a mérleg kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
4
Using TANITA Wireless Remote Tabletop Display
Initial Setting
Please make sure the scale is within 17feet (5m) with batteries inserted.
Insert batteries into the remote display.
Press any front panel button to start the communication process.
The wireless icon ( ) on the display will blink while the remote display communicates
with the platform. After the communication is successfully done (wireless icon
disappears), continue to step 1 “Set Hour”.
Note: If the communication fails, the display will show "ErrC", press any front panel
button to restart the communication process.
1. Set Hour
Press / to set hour and then press SET.
The unit will beep once to confirm.
2. Set Minute
Press / to set minute and then press SET.
The unit will beep twice to confirm the programming.
• Resetting time
Press the clock button on the bottom of the remote display.
Then follow the procedure 1 and 2.
Setting and storing personal data in memory
You will receive readings only if data has been programmed into the Tanita Remote Tabletop Display.
1. Select Personal Data Number
Use the SET button to activate the unit. Use / buttons to select a personal data number. Press SET.
2. Set Age
Use / buttons to select age. Press SET.
3. Select Female or Male
Use / buttons to select Female ( ) / Male ( ) / Athlete Female ( / ) / Athlete Male ( / ). Press SET.
4. Specify Height
Use / buttons to select height. Press SET.
5. Select Activity Level (Except D-1100)
Use the / buttons to specify Activity Level. Press the SET button to confirm
The remote display will beep twice and the display will flash all data three times to confirm the programming.
The power will then shut down automatically.
To use the DCI (Daily Calorie Intake) feature properly, you need to set the Activity Level.
Level 1 = Inactive lifestyles (little or no exercise)
Level 2 = Moderately active lifestyles (occasional, low intensity exercise)
Level 3 = Adult involved in intense physical activity
Note: If you select the Athlete Mode, it will automatically set the Activity Level to Level 3.
Switching The Weight Mode
Select your preferred weight mode using the weight mode switch on the bottom of the Remote Display.
Battery Cover
Backlight Button
Upright Position
5
Taking body composition readings
1. Before proceeding, make sure that the platform is within 17feet (5 m) of the remote display.
2. Press (User) button to turn the unit on and then press / buttons to select personal data number.
( .)Do not stand on the platform
3. Press the SET button to confirm your personal number.
4. When the remote display and platform are paired, the platform will beep once, and the Green Indicator Light will
blink.
5. Step onto the platform while the Green Indicator Light is blinking.
6. After the measurement is complete, the platform will beep twice, readings will automatically show on the remote
display.
7. Carefully step off platform after measurement is complete.
8. At anytime during and after the “Auto Display Process”, the user may use the / buttons to scroll thru the
different results. For advanced scrolling, the user may press and hold / button.
Upon reading the desired readings, release the button to view the result, readings will appear for 30 seconds before
the unit automatically shuts off.
Note: For children (age 7-17), the unit will only display the Weight and the Body Fat % (it will not display the Healthy Range
Indicator).
Recall Function
The previous readings of the following features can be obtained using the recall function.
• Weight • Body Fat % • Total Body Water % • Muscle Mass
• BMR/Metabolic Age or DCI/Metabolic Age • Visceral Fat Level
To obtain previous readings, press the SET button while the current readings are being displayed.
The display will show the previous readings. To see other previous readings, press for each desired reading.
Press SET again to go back to the current result display.
Note: For Children (age-7-17), the unit will only display the previous Weight and the Body Fat %.
Programming The Guest Mode
Guest mode allows you to program the unit for a one-time use without resetting a Personal data number.
Press button to activate the unit. Then follow the steps: Set Age, Select Female or Male, and Specify Height.
Taking Weight Measurement Only
Press the Weight-only key.
Step onto the platform while the Green Indicator Light is blinking.
After the measurement is complete, the platform will beep twice, readings will automatically show on the
remote display. Carefully step off platform after measurement is complete.
Warning
Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical device.
6
Troubleshooting
• Interference may occur if multiple platforms are present. Please use only one platform in any given area.
• Do not step onto the platform before the platform beeps once and the Green Indicator Light blinks.
• Do not step off until after hearing a double beep or the Green Light remains solid (stops blinking), the measurement is taken, and
the readings are displayed on the applicable device (e.g. Garmin Watch, Tanita Remote Display, and/or PC).
• If you do not step onto the platform within 30 seconds after Green Indicator Light begins blinking, the power will shut-off
automatically.
• Constant Red Indicator Light
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned on the measuring platform.
(see p.2)
Make sure to step onto the platform only it has beeped twice or the Green Indicator Light is blinking.after
The unit cannot accurately measure your weight if it detects movement. Please stand on the platform keeping movement to a
minimum.
The Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.
Reading cannot be obtained if the weight capacity is exceeded. Weight capacity is 440 lb (200kg).
• Blinking Red Indicator Light
Batteries are low. When the Red Indicator Light is blinking, replace the batteries immediately, since weak batteries will affect the
accuracy of your measurements. Change all the batteries at the same time with new batteries.
Specifications
BC-1000
Weight Capacity
440lb / 200kg
Weight Increments
0.2lb / 0.1kg
Power Supply
DC 6V (LR6 - AA Battery x 4 included)
Power Consumption
100 mA maximum
Temperature Range of usage
41°F - 95°F / 5°C - 35°C
Federal Communications Commission and Canadian
ICES Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio or television technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.

Termékspecifikációk

Márka: Tanita
Kategória: mérleg
Modell: D-1000

Szüksége van segítségre?

Ha segítségre van szüksége Tanita D-1000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mérleg Tanita

Tanita

Tanita BC-531 Útmutató

2 Április 2025
Tanita

Tanita InnerScan BC-1000plus Útmutató

13 Január 2025
Tanita

Tanita HD-385 Útmutató

13 Január 2025
Tanita

Tanita UM-028F Útmutató

15 Október 2024
Tanita

Tanita UM-070 Útmutató

14 Október 2024
Tanita

Tanita UM-016 Útmutató

13 Október 2024
Tanita

Tanita 1479J Útmutató

9 Október 2024
Tanita

Tanita InnerScan BC-570 Útmutató

30 Szeptember 2024
Tanita

Tanita InnerScan BC-558 Útmutató

23 Szeptember 2024
Tanita

Tanita BF-662W Útmutató

19 Szeptember 2024

Útmutatók mérleg

Legújabb útmutatók mérleg

Ade

Ade Michaela BA 1006 Útmutató

7 Április 2025
Kern

Kern MGB 150K100 Útmutató

6 Április 2025
Teesa

Teesa TSA0813 Útmutató

3 Április 2025
Sencor

Sencor SBS 2507 Útmutató

1 Április 2025
Kern

Kern PCD 300-3 Útmutató

1 Április 2025
Exakta

Exakta Premium Útmutató

31 Március 2025
Kern

Kern FCE 3K-3A Útmutató

30 Március 2025
Kern

Kern TEFS 500-2-A Útmutató

30 Március 2025
Kern

Kern MPL 200K-1P Útmutató

30 Március 2025
Kern

Kern FCE 10K-3A Útmutató

29 Március 2025