Használati útmutató Tanita FitScan BC-1100F

Tanita mérleg FitScan BC-1100F

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tanita FitScan BC-1100F (7 oldal) a mérleg kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/7
Model : FitScan BC-1100F
MANUAL
Instruction Manual
Read this Instruction Manual carefully and keep for future reference.
Introduction
Thank you for selecting a Tanita Body Composition Monitor. This monitor is one in a wide range of
home healthcare products produced by Tanita.
This Instruction Manual will guide you through the setup procedures and outline the key features.
Please keep it handy for future reference. Additional information on healthy living can be found on our
website www.tanita.com.
Tanita products incorporate the latest clinical research and technological innovations.
All data is monitored by our Tanita Medical Advisory Board to ensure accuracy.
Note: Read this Instruction Manual carefully and keep it handy for future reference.
Safety Precautions
People with an electronic medical implant, such as a pacemaker, should not use a Body Composition Monitor as it passes a low-level
electrical signal through the body, which may interfere with its operation.
Pregnant women should use the weight function only. All other functions are not intended for pregnant women.
Do not place this monitor on slippery surfaces such as a wet floor.
Important Notes for Users
This Body fat monitor is intended for adults and children (ages 5-17) with inactive to moderately active lifestyles and adults with
athletic body types.
Tanita defines “athlete” as a person involved in intense physical activity of approximately 10 hours per week, for
at least 6 months, and who has a resting heart rate of approximately 60 beats per minute or less.
Tanitas athlete definition includes “lifetime of fitness” individuals who have been fit for years but currently
exercise less than 10 hours per week.
The body fat monitor function is not intended for pregnant women, professional athletes or bodybuilders.
Tanita takes no responsibility for any kind of damage or loss caused by these units, or any kind of claim made by a third person.
Note: Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or over-
hydration due to such factors as alcohol consumption, menstruation, illness, intense exercise, etc. It is recommended that if
possible all readings should be taken at the end of one’s day since in the morning after rising from sleep, hydration levels are
at their lowest.
Features and functions
Measuring Platform Accessories
1. Indicator light (Green and Red)
2. Ball-of Foot Electrodes
3. Heel Electrodes
4. AA-Size Batteries (4)
1
Preparations before use
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied
AA-batteries as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend
to use this unit for a long period of time, it is advisable to remove the batteries
before storage.
Please note that the included batteries from the factory may have decreased energy levels
over time.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to
ensure safe and accurate measurement.
Note : To avoid possible injury, do not step on the edge of the platform.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid
soaps.
• Do not step on the platform when wet.
• Do not drop any objects onto the platform.
• Do not use this scale while operating transmitters (such as a cell phone) as this may affect your results.
• If not in use for a prolonged period of time it is recommended that you remove the batteries.
Getting accurate readings
To ensure accuracy, readings should be taken without clothing and
under consistent conditions of hydration. If you do not undress,
always remove your socks or stockings, and be sure the soles of
your feet are clean before stepping on the measuring platform.
Be sure that your heels are correctly aligned on the measuring
platform. Don’t worry if your feet appear too large for the unit
-accurate readings can still be obtained if your toes overhang the
platform.
It is best to take readings at the same time of day. Try to wait about
three hours after rising, eating, or hard exercise before taking
measurements.
While readings taken under other conditions may not have the
same absolute values, they are accurate for determining the
percentage of change as long as the readings are taken in a
consistent manner. To monitor progress, compare weight and body
fat percentage taken under the same conditions over a period of
time.
Note : An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting
position.
Open as shown.
Direction of
the batteries.
Heels centered on
electrodes
Toes may overhang
measuring platform

Termékspecifikációk

Márka: Tanita
Kategória: mérleg
Modell: FitScan BC-1100F

Szüksége van segítségre?

Ha segítségre van szüksége Tanita FitScan BC-1100F, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mérleg Tanita

Útmutatók mérleg

Legújabb útmutatók mérleg

Kern

Kern MGB 150K100 Útmutató

6 Április 2025
Teesa

Teesa TSA0813 Útmutató

3 Április 2025
Sencor

Sencor SBS 2507 Útmutató

1 Április 2025
Kern

Kern PCD 300-3 Útmutató

1 Április 2025
Exakta

Exakta Premium Útmutató

31 Március 2025
Kern

Kern FCE 3K-3A Útmutató

30 Március 2025
Kern

Kern TEFS 500-2-A Útmutató

30 Március 2025
Kern

Kern MPL 200K-1P Útmutató

30 Március 2025
Kern

Kern FCE 10K-3A Útmutató

29 Március 2025