Használati útmutató Tascam HS-2000

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tascam HS-2000 (3 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.2 csillagra

Oldal 1/3
HS-2 HS-2000
D01178900A
使用時の注
0USBメモリーとのFTP転送については、停止状態においてのみ対応しています。編集、プロジェクトロード、スキップなど、操作しないで
ください。
0“REMOTE SETUP” “ETHERNET” “IP MODE” “DHCP “STATIC画面の タブ画面の 項目の設定を から に切り換えた際は、本機
の電源を一旦切って再度電源を入れ直してください。
取扱説明書の訂正
HS-2取扱説明書P104第11章「マーク機能とロケート機能、またはHS-2000取扱説明書P106第12章「マーク機能とロケート機能」
のマーク機能」→「マークポイントを付ける」にある「p フロントパネルにあるMARKキーを押す」の項目の記述
誤: タイムラインモードではタイムラインとファイル自体にマークがつきます。
x
正: タイムラインモードでは、タイムラインにのみマークがつきます。ファイルにはつきません。
Precautions during use
0 FTP transmission with USB ash memory is only supported when the unit is not otherwise operating. Do not perform any operation,
including editing, loading a project and skipping, during FTP transfer.
0 After changing the IP
MODE item setting from DHCP to STATIC on the ETHERNET page of the REMOTE
SETUP
screen, turn the unit’s power o once and then restart it.
Correction to the Owner’s Manual
There is an error under the “Push the MARK key on the front panel heading in the “Adding marks” subsection of the “Mark functions”
section in 11Mark and locate functions” of the HS-2 Owner’s Manual (page 109) and “12Mark and locate functions” of the HS-2000
Owner’s Manual (page 122).
Incorrect : In timeline mode, a mark is added to both the timeline and the le itself.
Correct : In timeline mode, a mark is added only to the timeline. No mark is added to the le.
PrintedinChina

Termékspecifikációk

Márka: Tascam
Kategória: hi-fi rendszer
Modell: HS-2000

Szüksége van segítségre?

Ha segítségre van szüksége Tascam HS-2000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek