Használati útmutató Taylor 5593

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Taylor 5593 (2 oldal) a mérleg kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.3 csillagra

Quick Use Guide

General Set Up Procedures

Weight Only Operation

Analyzer Operation

Following are short reference instructions for general set up, weight readings and body fat/body water readings. Please

read the complete instruction manual before first time use for detailed information and helpful illustrations,

as well as for troubleshooting and precautions.

1. Some models have a static cling label on the lens; remove before use. If a battery is included, remove

any plastic wrap from the battery before installation. If there is a red strip under the battery cover,

remove before use.

2.Select (lb), (kg), or (st) with the slide switch on the bottom of the scale. If the switch is recessed into the

scale, please use a small tool which will not damage the scale to move the switch.

3.Place the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy.

4.The scale needs to be initialized before first use to accurately calculate your weight. To do so, simply

press lightly on the scale platform and release. The display will show ““,or ““, and ---- 0000

automatically turn off. Your scale is now ready for use. Note:You will only need to initialize the scale

before first use, after battery replacement, or when the scale has been moved or bumped. At all other

times you may step directly on the scale for a weight reading, or begin entering your personal

data for a body fat/body water analysis.

Your Taylor® Body Fat Scale will operate as a basic weight-reading scale.

1. Step onto the scale platform and remain still.

2. The scale will calculate your weight.

3. The scale will turn off automatically.

4. Err0 If “” appears on the display, the scale does not turn on, or you have an inaccurate reading, the

scale needs to be initialized. Press lightly on the scale platform. The LCD will turn on and off

automatically. Step on the platform again for a weight only reading.

The analyzer will use your height, age, gender, and normal/athlete values to calculate your body fat %

and body water %. On screen prompts will lead you through programming your personal data into the

analyzer.

Important: You must have bare feet to use the analyzer function. Please remove your shoes

and socks before operation. For best results, wipe your feet with a damp cloth, leaving

them slightly damp before stepping on the scale.

1. “SET” Press .

2. “UP/DOWN”Press button to scroll to your height. Press to enter.“SET”

3. “UP/DOWN” Press button to scroll to your age. Press to enter.“SET”

4. “UP/DOWN”Press button to switch between male and female icons. Press to enter.“SET”

5. “UP/DOWN”Press button to switch between athlete (running man icon on LCD) or normal (no icon

on LCD) modes.

6. “SET”Press . A beep sound indicates set up is complete.

7. Step onto the scale with bare feet and remain still.

8. The weight will appear on the LCD for 2 seconds.

9. The scale will then calculate body fat %. The LCD shows spinning zeros while computing.

10. A beep sounds and the LCD shows body fat %, followed by results for body water % and weight.

11. The scale will turn off automatically.

Termékspecifikációk