Használati útmutató TC Electronic JUNE-60 V2 Chorus

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TC Electronic JUNE-60 V2 Chorus (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 5.0 csillagra

TC Electronic

JUNE-60 V2 CHORUS

Authentic Recreation of the Juno-60

Synthesizer Chorus with 2-Button Interface

and BBD Circuitry

Quick Start Guide

Controls and Connectors

(1) Input/Output jacks – Connect a ¼" TS cable from your

guitar to the INPUT jack.

Mono setup: Set slider to MONO and connect a ¼"

TS cable from the OUTPUT jack to your amplier.

Set slider to STEREO and connect a Stereo setup:

¼" TRS split cable from the OUTPUT jack to a pair

of ampliers.

Note: Input impedance has two options designed to optimize

performance for guitar or keyboard. Access the internal INPUT

LEVEL slide switch (SW6) to choose the optimal option for

your setup

(2) 9 V DC – Connect a standard 9 V power supply

(not included).

(3) Footswitch – Turns the eect on and o. The LED will

light when the pedal is engaged. The pedal operates in

true bypass when disengaged.

(4) Mode – Press button I or II to select between 2 chorus

preset settings. Press buttons I and II simultaneously to

activate a 3rd chorus preset setting.

Note: Preset I and II LFO speeds can be changed independently

via the internal LFO SPEED DIP switch (SW5).

SLOW = Original JUNO settings (recommended for keyboards)

FAST = Original JUNE 60 settings (recommended for guitar)

SettingsIIIIII (I+II)

SLOW 0.5 Hz0.83 Hz

10 Hz

FAST 1.3 Hz2.2 Hz

(5) M/Stereo switchono – Select between MONO and

STEREO mode.

Internal Option Switches

(6) INPUT LEVEL – Select between input impedance for

GUITAR or KEYBOARD.

(1) LFO SPEED – Select FAST or SLOW for preset I and/or II.

Battery Replacement

Storage

(3)

(1)

(4)

(5)

(2)

(2)

(1)

V 1.0

Termékspecifikációk