Használati útmutató Teltonika RUT200

Teltonika router RUT200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Teltonika RUT200 (4 oldal) a router kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Quick Start Guide v1.1
Wiki knowledge base
RUT200
https://wiki.teltonika-networks.com/
FRONT VIEW
BACK VIEW
WiFi antenna connector Mobile AUX antenna
connector Mobile MAIN antenna
connector
Reset button
Mobile signal strength indication LEDs
Ethernet
ports
LAN LEDSIM holder
Power socket
Power LED
WAN LED
Mobile network type LEDs
(transparent view 2G, 3G, 4G)
Ground / Black wire
Output / White wire
Power / Red wire
Input / Green wire
POWER SOCKET PINOUT
1. Push the SIM holder button with the SIM needle.
2. Pull out the SIM holder.
3. Insert your SIM card* into the SIM holder.
4. Slide the SIM holder back into the router.
5. Attach all antennas.
6. Connect the power adapter to the socket on the front of the device. Then plug the other end of the power
adapter into a power outlet.
7. Connect to the device wirelessly using SSID and password provided on the device information label or use an
Ethernet cable connected to LAN port.
*If device is used in damp/high vibration environments, it is strongly recommended to apply a thin layer of anti-corrosive agent over SIM card
contacts. Make sure the agent is suitable for electronic contacts.
HARDWARE INSTALLATION

Termékspecifikációk

Márka: Teltonika
Kategória: router
Modell: RUT200

Szüksége van segítségre?

Ha segítségre van szüksége Teltonika RUT200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek