Használati útmutató Texas Instruments 74AC11086N
Texas Instruments
nincs kategorizálva
74AC11086N
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Texas Instruments 74AC11086N (11 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/11
74AC11086
QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE
SCAS081A – NOVEMBER 1989 – REVISED APRIL 1996
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Center-Pin VCC and GND Congurations
Minimize High-Speed Switching Noise
EPIC
(Enhanced-Performance Implanted
CMOS) 1-µm Process
500-mA Typical Latch-Up Immunity at
125°C
Package Options Include Plastic
Small-Outline (D) Packages and Standard
Plastic 300-mil DIPs (N)
description
This device contains four independent 2-input exclusive-OR gates. It performs the Boolean function
Y = A ⊕ B = AB + AB in positive logic.
A common application is as a true/complement element. If one of the inputs is low, the other input is reproduced
in true form at the output. If one of the inputs is high, the signal on the other input is reproduced inverted at the
output.
The 74AC11086 is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
(each gate)
INPUTS OUTPUT
A B Y
L L L
L H H
H L H
H H L
logic symbol†
1
1A 16
1B 1Y
2
15
2A
14
2B 2Y
3
11
3A
10
3B 3Y
6
9
4A 8
4B 4Y
7
=1
†This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Copyright 1996, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1A
1Y
2Y
GND
GND
3Y
4Y
4B
1B
2A
2B
VCC
VCC
3A
3B
4A
D OR N PACKAGE
(TOP VIEW)
74AC11086
QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE
SCAS081A – NOVEMBER 1989 – REVISED APRIL 1996
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
logic diagram (positive logic)
1Y
1A
1B
1
16
2
2Y
2A
2B
15
14 3
3Y
3A
3B
11
10 6
4Y
4A
4B
9
8
7
exclusive-OR logic
An exclusive-OR gate has many applications, some of which can be represented better by alternative logic symbols.
EXCLUSIVE OR
= 1
These are ve equivalent exclusive-OR symbols valid for a 74AC11086 gate in positive logic; negation may be shown
at any two ports.
=2k 2k+1
EVEN-PARITY ELEMENT ODD-PARITY ELEMENT
LOGIC-IDENTITY ELEMENT
The output is active (high) if
all inputs stand at the same
logic level (i.e., A=B).
The output is active (high) if
an even number of inputs
(i.e., 0 or 2) are active (high).
The output is active (high) if an
odd number of inputs (i.e., only
1 of the 2) are active (high).
absolute maximum ratings over operating free-air temperature range (unless otherwise noted) †
Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, VO (see Note 1) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0 or VI > VCC) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VCC) ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, IO (VO = 0 to VCC) ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through VCC or GND ±100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum power dissipation at TA = 55°C (in still air) (see Note 2): D package 1.3 W. . . . . . . . . . . . . . . . . . . .
N package 1.1 W. . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The maximum package power dissipation is calculated using a junction temperature of 150C and a board trace length of 750 mils,
except for the N package, which has a trace length of zero.
74AC11086
QUADRUPLE 2-INPUT EXCLUSIVE-OR GATE
SCAS081A – NOVEMBER 1989 – REVISED APRIL 1996
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
MIN NOM MAX UNIT
VCC Supply voltage 3 5 5.5 V
VCC = 3 V 2.1
VIH High-level input voltage VCC = 4.5 V 3.15 V
VCC = 5.5 V 3.85
VCC = 3 V 0.9
VIL Low-level input voltage VCC = 4.5 V 1.35 V
VCC = 5.5 V 1.65
VIInput voltage 0 V
CC V
VOOutput voltage 0 V
CC V
VCC = 3 V –4
IOH High-level output current VCC = 4.5 V –24 mA
VCC = 5.5 V –24
VCC = 3 V 12
IOL Low-level output current VCC = 4.5 V 24 mA
VCC = 5.5 V 24
∆ ∆t/ v 0 10 ns/VInput transition rise or fall rate
TAOperating free-air temperature –40 85 °C
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
TA = 25°C
MIN
MAX
UNIT
PARAMETER
TEST
CONDITIONS
V
CC MIN TYP MAX
MIN
MAX
UNIT
3 V 2.9 2.9
IOH = –50 µA 4.5 V 4.4 4.4
5.5 V 5.4 5.4
VOH IOH = –4 mA 3 V 2.58 2.48 V
I 24 A
4.5 V 3.94 3.8
IOH = –24 mA 5.5 V 4.94 4.8
IOH = –75 mA†5.5 V 3.85
3 V 0.1 0.1
IOL = 50 µA 4.5 V 0.1 0.1
5.5 V 0.1 0.1
VOL IOL = 12 mA 3 V 0.36 0.44 V
IOL 24 mA
4.5 V 0.36 0.44
I
OL =
24
mA
5.5 V 0.36 0.44
IOL = 75 mA†5.5 V 1.65
IIVI = VCC or GND 5.5 V ± ±0.1 1 Aµ
ICC VI = VCC or GND, IO = 0 5.5 V 4 40 Aµ
CiVI = VCC or GND 5 V 3.5 pF
†Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.
Termékspecifikációk
| Márka: | Texas Instruments |
| Kategória: | nincs kategorizálva |
| Modell: | 74AC11086N |
Szüksége van segítségre?
Ha segítségre van szüksége Texas Instruments 74AC11086N, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Texas Instruments
15 Október 2024
6 Október 2024
4 Október 2024
28 Szeptember 2024
22 Szeptember 2024
18 Szeptember 2024
17 Szeptember 2024
14 Szeptember 2024
13 Szeptember 2024
10 Szeptember 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Best
- nincs kategorizálva Harvia
- nincs kategorizálva Cylinda
- nincs kategorizálva Gamdias
- nincs kategorizálva Waltec
- nincs kategorizálva Teac
- nincs kategorizálva Creamsource
- nincs kategorizálva Turbosound
- nincs kategorizálva Newport Brass
- nincs kategorizálva Schuberth
- nincs kategorizálva Elbro
- nincs kategorizálva Cane Creek
- nincs kategorizálva A-Designs
- nincs kategorizálva Argus
- nincs kategorizálva Eureka
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025