Használati útmutató TFA AirCo2ntrol Life

TFA füstérzékelő AirCo2ntrol Life

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TFA AirCo2ntrol Life (2 oldal) a füstérzékelő kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

5020 0105- CO2 Monitor ( Temp. Operating Instructions CO2+ +RH)

Product Overview

Thank you for selecting -0105 desktop monitor, -0105 monitor is smart, compact and easy- -use. In addition to measuring 5020 CO25020 CO2to

the CO concentration, - can also measure the ambient temperature and the relative humidity25020 0105 (CO2 Temp. RH)+ + . This product is

developed to detect the presence of in ambient air and help people to take care of Indoor Air Quality. - can be widely used in the CO25020 0105

office building, school, exhibition hall, shopping mall, meeting room, fitness center, restaurant and other public places where personal comfort,

healthy is important.

Features:

□,V Three different LED display shows the current Indoor Air Quality

□,V Press MUTE button for alarm on/off.

□,V Built in the LCD Backlight for easy reading in the dark.

Warnings:

□,V Please take off the AC power adapter and store it well when this CO2 monitor left idle for

long.

□,V This CO2 monitor is for home use, not suitable for certifying the test results.

□,V If use this CO2 monitor for testing,5020-0105 does not guarantee the test results.

EMC/RFI

Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per meter, but the

performance of the instrument will not be permanently affected.

Note: Under the electromagnetic field of 3V/m, the reading will not meet the specification.

Warm-Up Time: 2 MIN.

Using the MUTE function:

Safety Instructions

Warning: Your safety is very important to us .To ensure to use the product correctly and safely, we would like to draw your attention to read the warning and

entire User Manual before using the product. These are important safety information and should be observed at all times.

1. Please handle the devices lightly, not subject the product to impact or shock. do

2. Do not immerse the product in water. Water can cause electric shock, fire or malfunction which may result in . damage

3. Do not keep the product under the hot and moisture environment. Keep the product away f m the heat source or near water. ro

4. Please use only the included power adaptor. Improper power adaptor or power sources can cause serious damage to the product, or result in injury or death

to the user.

Caring for product

To ensure you receive the maximum benefit from using this product, please observe the follow guidelines.

1. Cleaning Disconnect the power before clean. Use a damp cloth, do not use the liquid cleaning agent, such as benzene, thinner or aerosols. —

2. Repair----Do not attempt to repair the product or modify the circuitry by yourself. Please contact with the local dealer or a qualified repairman if the product

1. Green LED Display (<800ppm)

2. Yellow LED Display (800-1200ppm)

3. Red LED Display ( >1200ppm ) & buzzer alarm

4 Mute Button .

5. Power Inlet

6. Housing Stand

7. Screw Position

1. 2 min. warm-up time when first time power.

2. The LCD shows 4 bars with 1sec blank cycle during warm- up

3. up The MUTE button is disabled during warm-

4. up The device shows the CO2 reading after warm-

Press MUTE button to select buzzer on/off. If the M function is off, while CO2 concentration exceed the alarm level (>1200 ppm), there will be a buzzer.“ UTE”

Note: The device setting with alarm is buzzer when power on first time, user can set the alarm on/off under MUTE function. on