Használati útmutató Thermaltake Pacific DP100-D5 Plus

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Thermaltake Pacific DP100-D5 Plus (2 oldal) a Hardverkoeling kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.5 csillagra

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !

Installation Guide

Parts List

To install the DP100 in your

chassis, placing a screw and

washer that comes with the DP100

on every screw hole that matches

the circles in below picture.

1 23

Distro Plate

Ax 1

LED YCable-

B x 1

Washer

C x 12

Screw

D x 12

G1/4 Stop Plug

E x 4

Wrench

F x 1

Controller

G x 1

Power Cable

H x 1

Controller Cable

I x 1

Bridge Cable

J x 1

MB SYNC Cable

K x 1

Velcro

L x 1

Circle 1 is designed for liquid outlet, you may

choose one of the ports to use.

Circle 2 is designed for liquid inlet/fill, you may

choose one of the ports to use.

Circle 3 is the drain port.

Assembly example can refer to

the following figure.

4

To avoid air bubble

during liquid cooling

system working, please

fill the reservoir with

coolant to the line

(Normal coolant level)

1

2 2

1

1

3

5

Connect the LED Y-Cable onto

the Distro Plate.

Patented

16.8Million Color

Pacific Plus

DP 00-D51

B

A

Termékspecifikációk