Használati útmutató Thompson Traders Fireclay KSA-493FC
Thompson Traders
Mosdó
Fireclay KSA-493FC
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Thompson Traders Fireclay KSA-493FC (2 oldal) a Mosdó kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/2
Fireclay sinks are distinct and ready for heavy duty use. Fireclay is coated in a high strength glaze which is
resistant to scratches and stains. Fireclay is a very dense material which makes each sink hard to chip as well
as very heavy. We recommend using at least two people when lifting the sink. Fireclay sinks will require extra
support and modification to existing cabinets.
1. Trace the rim of the sink on a piece of craft paper or cardboard. Measure the distance between the edge of
the basin and the inside edge of the lip. Add a second line inside the first according to this measurement. Cut
on the second line to make your cut out sheet.
2. Measure the front apron of the sink and cut the face of the cabinet to allow the sink to slide in.
3. Install the sink support in the cabinet base. See steps 4 - 6.
4. Install two lengths of 2x4’s front to back in the cabinet base. Build out the support structure and ledge for
your Fireclay sink to rest on.
5. Install a length of 2x4 vertically under each corner of the sink base to create support legs directly under the
sink.
8. Cut the countertop with your template and install the countertop. Apply a bead of silicone sealant between
the rim of the sink and the countertop to create a watertight seal.
Fir
Fir
Fir
Firecla
ecla
ecla
eclay b
y b
y b
y by T
y T
y T
y Thompson T
hompson T
hompson T
hompson Tr
r
r
raders
aders
aders
adersFireclay by Thompson Traders
6. The sink should rest 1/8” inch below the
top of your cabinets, ensuring plenty of
clearance for countertop installation. Use a
level to make sure the sink is even and will
drain correctly.
7. Place the sink in the support structure.
Apply a bead of silicone sealant between
the rim of the sink and the countertop to
create a watertight seal. Hook up the drain
underneath according to the drain instruc-
tions and the sink will be ready for use.
DO NOT overtighten your disposal drain,
this could damage your kitchen sink. Use
plumbers putty to make a water tight seal
between the drain and the sink.
Important
Important
Important
ImportantImportant
Thompson Traders’ Fireclay sinks require a solid support built into the
cabinet and recommend professional installation. We recommend an
undermount install with a frame supporting the underside of the sink.
Thompson Traders, Inc.
P.O. Box 7407, Greensboro, N.C. 27417
Ph: 336.272.3003
customerservice@thompsontraders.com
www.thompsontraders.com
Termékspecifikációk
| Márka: | Thompson Traders |
| Kategória: | Mosdó |
| Modell: | Fireclay KSA-493FC |
Szüksége van segítségre?
Ha segítségre van szüksége Thompson Traders Fireclay KSA-493FC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Mosdó Thompson Traders
3 Január 2025
3 Január 2025
3 Január 2025
3 Január 2025
3 Január 2025
3 Január 2025
Útmutatók Mosdó
- Mosdó Ikea
- Mosdó Rangemaster
- Mosdó ProFlo
- Mosdó ARC
- Mosdó Alfi
- Mosdó Coyote
- Mosdó Enza
- Mosdó Lynx
- Mosdó Vigo
- Mosdó CDA
- Mosdó Dxv
- Mosdó Kernau
- Mosdó Miomare
- Mosdó Elkay
- Mosdó Whitehaus
Legújabb útmutatók Mosdó
15 Január 2025
4 Január 2025
4 Január 2025
4 Január 2025
3 Január 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025