Használati útmutató Toolland WHORW2T

Toolland nincs kategorizálva WHORW2T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Toolland WHORW2T (16 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
WHORW2T/WHORW4T
EN
HORIZONTAL WINCH
NL
HANDLIER HORIZONTAAL
FR
TREUIL HORIZONTAL
ES
CABRESTANTE HORIZONT AL
DE
HANDSEILWINDE
PL
WYCIĄGARKA POZIOMA
PT
POLIA DE MÃO HORIZONTAL
USER MANUAL 2
GEBRUIKERSHANDLEIDING 4
MODE D’EMPLOI 6
MANUAL DEL USUARIO 8
BEDIENUNGSANLEITUNG 10
INSTRUKCJA OBSŁUGI 12
MANUAL DO UTILIZADOR 14
WHORW2T/WHORW4T
V. 02 07/02/2017 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Always inspect the cable throughout its length for kinks, frays or any damage before each use.
Do not pull the cable around a corner.
Fix load securely; do not wrap winch cable around load.
Do not pull more than rated load. Never overload the winch.
Never lengthen the lever using a pipe for additional leverage. This can cause the winch lever to bend or
break.
Operate winch with at least 3 wraps of cable on spindle.
Always use an adequate sling, eyebolt or other accessory attached to the load to be pulled. Make sure there
is positive engagement of the winch hook to the load.
Do not lift any loads with this winch.
3. Description
4. Extending the Cable
Secure the winch to a rigid anchor point. Pull the drive pawl spring in the direction of the arrow (see fig. 2,
detail A). Raise the handle and hold it firmly into position (see fig. 2, detail C). Press the stop pawl in the
direction of the arrow (see fig. 2, detail D) and pull until the desired slack is obtained.
WHORW2T/WHORW4T
V. 02 07/02/2017 3 ©Velleman nv –
5. Pulling a Load or Applying Tension
Engage the drive pawl and ratchet wheel by pushing the pawl in the direction of the arrow (see fig. 2, detail B).
Each stroke of the handle will wind the cable and pull the load.
6. Slackening the Cable
Pull the pawl spring in the direction of the arrow (see fig. 2, detail A). Steadily push the handle until the drive
pawl pushes and disengages the stop pawl to clear the ratchet teeth. This will release the load one notch.
Repeat this motion as required until the cable is sufficiently slackened.
CAUTION! When releasing the load, avoid abrupt movements. Apply a steady pressure to the handle.
7. Technical Specifications
max. cable length
WHORW2T ...................................................................................................... 3.6 m
WHORW4T ......................................................................................................... 3 m
cable Ø
WHORW2T ...................................................................................................... 5 mm
WHORW4T ................................................................................................... 5.7 mm
working capacity
WHORW2T ................................................................................................... 1000 kg
WHORW4T ................................................................................................... 1500 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.

Termékspecifikációk

Márka: Toolland
Kategória: nincs kategorizálva
Modell: WHORW2T

Szüksége van segítségre?

Ha segítségre van szüksége Toolland WHORW2T, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Toolland

Toolland

Toolland 2002-200 Útmutató

8 December 2024
Toolland

Toolland WHORW2T Útmutató

8 December 2024
Toolland

Toolland WEH300 Útmutató

8 December 2024
Toolland

Toolland QT113 Útmutató

8 December 2024
Toolland

Toolland QT123 Útmutató

8 December 2024
Toolland

Toolland VL104 Útmutató

22 Augusztus 2024
Toolland

Toolland DT20008N Útmutató

15 Augusztus 2024
Toolland

Toolland DTB10000 Útmutató

14 Augusztus 2024
Toolland

Toolland AC06 Útmutató

14 Augusztus 2024
Toolland

Toolland DT20016N Útmutató

13 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025