Használati útmutató TP-Link TL-SF1008LP

TP-Link nincs kategorizálva TL-SF1008LP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TP-Link TL-SF1008LP (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.6 csillagra

Letöltés PDF

Oldal 1/2

Installation Guide

Connection

Unmanaged Desktop PoE/PoE+ Switch

IP Camera AP

Ethernet Ports (1-8)

PoE Ports (1-4)

IP Phone

PoE Devices

PoE ports can also connect to non-PoE devices, but only transmit data.

Note:

TL-SL1210MP has two uplink ports, which typically connect to uplink devices like routers.

Uplink 1 is an SFP port and works with a 1000 Mbps SFP module. Uplink 2 is an RJ45 port.

Internet

Link/Act

On: Link present but no activity

Flashing: Transmitting/receiving data

O: No link

PoE Status

On: PoE power provided

Flashing: Current-overload/ Short-circuit

O: No PoE power provided

Power

On: Power on

O: Power o

LED Explanation

DC Power Adapter

AC Power Cord

Switches Explanation

Note: For simplicity, we will take TL-SF1008P for example throughout the Guide.

O: Ports run at 10/100 Mbps and support PoE power supply up to 100 m away.

On: Ports run at 10 Mbps and support PoE power supply up to 250 m away.

Extend (for TL-SF1008LP/TL-SF1008P/TL-SF1009P)

PoE MAX

TL-SF1008LP

On: 34 W ≤ Total power supply < 41 W

Flashing: Total power supply = 41 W

O: Total power supply < 34 W

TL-SF1008P

On: 59 W ≤ Total power supply < 66 W

Flashing: Total power supply = 66 W

O: Total power supply < 59 W

TL-SF1009P

On: 58 W ≤ Total power supply < 65 W

Flashing: Total power supply = 65 W

O: Total power supply < 58 W

O: The PoE Auto Recovery function is disabled.

On: The switch will constantly detect the working status of a PoE powered device (PD).

When the switch nds that the PD works abnormally, the switch will reboot it.

Recovery (only for TL-SF1008P)

O: Ports can transmit data with each other.

On: Downlink ports cannot transmit data with each other. They can transmit data only with

the uplink port.

Isolation (only for TL-SF1009P)

O: All the ports transmit data with the same priority.

On: The specic ports transmit data with a higher priority than other ports.

Priority (for TL-SF1008LP/TL-SF1008P/TL-SF1009P)

Note: The numbers in brackets indicate the ports where the feature takes eect. For example, when Extend(1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.