Használati útmutató Trek Procaliber 9.6

Trek kerékpár Procaliber 9.6

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Trek Procaliber 9.6 (4 oldal) a kerékpár kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/4
2021 PROCALIBER CARBON
SERVICE MANUAL SUPPLEMENT
Table of Contents
Install the IsoSpeed 1
Install the rear derailleur hanger 3
Cable routings 3
Install the guards 4
Headset 4
Bottom Bracket 5
2021 Procaliber Carbon service manual supplement
NOTE This manual has the unique design
features and components for the 2021 Procaliber
carbon bicycle.
2
2021 Procaliber Carbon service manual supplement
7. Install the rst IsoSpeed bolt in the non-
drive side. Use your nger to push the sleeve
towards the bolt to begin threading.
NOTE Do not thread more than two
revolutions at this time.
8. Grease the driveside bearing bore.
9. While pushing the bolt and the sleeve towards
the drive side, install the second IsoSpeed
bolt and bearing in the drive side. Thread the
bolt and press the bearing into the sleeve from
the drive side.
10. Use two 5mm wrenches to tighten both bolts.
11. Torque the bolts to 8Nm.

Termékspecifikációk

Márka: Trek
Kategória: kerékpár
Modell: Procaliber 9.6

Szüksége van segítségre?

Ha segítségre van szüksége Trek Procaliber 9.6, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek