Használati útmutató TRENDnet TC-P12C6AS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TRENDnet TC-P12C6AS (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.2 csillagra

Oldal 1/2
1
1
1
11
2
2
2
22
Strip and remove 80mm of
the Ethernet cable jacket. Fold
Shielding back over jacket.
3
3
3
33
Layout the wires onto the patch panel based on the
IDC color code. The IDC color codes can be found
on the table below. (Reference the color codes
labeled A for T568A. Reference the color codes
5
5
5
55
Connect ground wire to your grounding point and
reattach the metal cover to complete the installation.
Screw (Bolt)
Grounding Clip
Cable Fixture Hole
IDC
Terminals
T568A
Pair/Wire Color
T568B
Pair/Wire Color
Pin 5
Pin 4
Pin 1
Pin 2
Pin 3
Pin 6
Pin 7
Pin 8
1
2
3
4
1
2
3
4
White/Blue
Blue
White/Green
Green
White/Orange
Orange
White/Brown
Brown
White/Blue
Blue
White/Orange
Orange
White/Green
Green
White/Brown
Brown
*Use punch down tool to
press each wire and
trim excess length until
all pairs are terminated.
Remove the cover screws. Lift the left and right sides of the metal cover and slide the
metal cover backwards as shown below.
Place Grounding clip on the cables, screw on the
bolt until the cables are fastened to secure
grounding between cable and panel. Use supplied
cable ties to tighten the cables. When finished
replace the metal cover and finish the installation.
4
4
4
44
80mm
Foil
Braid Shield
Grounding Wire
Grounding Wire
Quick Installation Guide
8-Port Cat6A Shielded Wall Mount Patch Panel
TC-P08C6AS
12-Port Cat6A Shielded Wall Mount Patch Panel
TC-P12C6AS
Cable Tie

Termékspecifikációk

Márka: TRENDnet
Kategória: nincs kategorizálva
Modell: TC-P12C6AS

Szüksége van segítségre?

Ha segítségre van szüksége TRENDnet TC-P12C6AS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek