Használati útmutató Tripp Lite N252-024

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite N252-024 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.0 csillagra

1

Quick Start Guide

Installation

1

3

2

4

Cat5/5e/6/6a 110-Type UTP Patch Panels

Models: N052-024, N052-048, N252-024, N252-024-6A, N252-024-6A-OF, N252-048

Español 3 • Français 5 • Русский 7

PROTECT YOUR INVESTMENT!

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2017 Tripp Lite. All rights reserved.

22-24 AWG

Avoid gaps

Wrap strap

around cables.

Figure 1: T568A/B Wiring Scheme

Strip the cable jacket approximately 1.25 in. (30 mm).

Use a 110 impact tool for termination.

Note: Set the tool to the “Low Impact” setting.

Seat each wire according to the wiring scheme shown in Figure 1.

Ensure the untwisted length is as short as possible. Avoid overlapping

one pair over the others.

Note: 110 punchdown orientation may vary by model.

In order to maintain stable performance, ensure the cable bundles

are secured with the attached straps.

Termékspecifikációk