Használati útmutató Tripp Lite SmartRack SRCOOL24K

Tripp Lite légkondicionáló SmartRack SRCOOL24K

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite SmartRack SRCOOL24K (40 oldal) a légkondicionáló kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/40
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $50 value!
www.tripplite.com/warranty
1
Portable Air Conditioning Unit
SRCOOL18K, SRCOOL24K
(208/240V, 60 Hz)
Owner’s Manual
Introduction 2
Important Safety Instructions 2
Unpacking 3
Features 4
Installation 5
Operation 10
Maintenance 11
Troubleshooting 11
Storage and Service 13
Warranty and Product Registration 13
Español 14
Français 27
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
SYSTRPS
SYSTRPS
STA TDUPLXSP E E D
MODE
15X
MAST R
STA C K
SYSTRPS
STA TDUPLX
SPEED
MODE
15X
31X33X
MAST R
STA C K
SYSTRPSSTAT
DUP L XSPEE D
MODE
15X
3
1X33X
MAST R
STA C K
47X
50
SYSTRPS
SYSTRPS
STATD U P LX
SPEED
MODE
15X
MASTR
STACK
SYSTRPS
STATD U P L XSPE E D
MODE
15X
31X33X
MASTR
STACK
SYSTRPS
STATD U P L XSPE E D
MODE
15X 31X33
X
MASTR
STACK
47X
50
SYST
RPS
SYSTRPS
STATDUPLXSPEE D
MODE
15X
MAST R
STAC K
SYSTRPS
STATDUPLXSPEE D
MODE
15X 31X33X
MAST R
STAC K
SYST
RPSSTAT
DUPL XSPE E D
MODE
15X
31
X33X
MAST R
STAC K
47X
50
SRCOOL18K SRCOOL24K SRCOOL18K SRCOOL24K
2
Introduction
The self-contained Portable Air Conditioning Unit provides 18,000 or 24,000 BTUs of supplemental cooling capacity. Designed for IT
environments, it’s ideal for cooling overheated rack enclosures, IT equipment hot spots and network closets without access to facility air
conditioning. The Portable Air Conditioning Unit can focus cool air through its flexible cooling duct or cool a small room through its louvered vent.
The SRCOOL24K’s cooling output feature allows cool air to be split between two racks. It also filters and dehumidifies air to improve operating
conditions and equipment reliability. Condensate is re-evaporated for drip-free operation, so you won’t waste time emptying water collection
tanks. The self-contained design does not require any plumbing or special circuits, so setup is quick and easy. Eco-friendly R410A refrigerant
meets environmental standards worldwide.
Recommended Applications:
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation, operation
and storage of this product. Failure to heed these warnings may affect your warranty.
Warnings
• The individual user should determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual
applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of this device
for any specific application.
• Install the unit indoors, away from extreme temperatures or humidity, direct sunlight, dust and conductive contaminants.
• Leave adequate space around the unit for ventilation, with rear and vented sides not less than 20 inches (51 cm) from walls or other
obstacles.
• Install the unit on a flat surface with a gradient no more than 10°.
• Connect the unit directly to a grounded AC power outlet. Failure to do so may cause an electric shock or fire.
• This unit is designed to supply supplemental cooling for localized hot spots. It is not intended for continuous use.
• The power supply for the unit must be rated in accordance with the unit’s nameplate.
• Do not modify the plug nor use an adapter that would eliminate the ground connection.
• Do not use an extension cord to connect the unit to an AC outlet. Use only the power cord that came with the unit.
• Comply with all applicable wiring and safety regulations, such as National Electrical Code (NEC) in the United States.
• Do not plug additional equipment into the outlet where the unit is plugged in. Overloading the outlet may cause an electric shock or fire.
• Do not attempt to turn the unit on or off by connecting or disconnecting the AC plug. A serious electric shock may occur. Use the ON/OFF
button to turn the unit on or off.
• Turn the unit off and unplug it from the AC outlet before performing maintenance.
• Before connecting the unit to a dedicated drainage system, turn it off and unplug it. There is a risk of electric shock while the unit is plugged in.
• Maintenance should be performed by trained personnel only.
• Do not use thinners, alcohol, detergents or abrasive brushes to clean the unit’s cabinet. These items may damage the cabinet.
• Do not pour water over the unit. This may cause an electric shock and damage the unit.
• Do not operate the unit without the air filter. This may cause dust accumulation that may damage the unit.
• Do not attempt to operate the unit in a room with inadequate air circulation. Provide makeup air in accordance with applicable building codes.
• Do not place objects on top of the unit.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
1. Cooling a small room. 2. Cooling an overheated rack enclosure. 3. Cooling an equipment hot spot inside or
outside a rack enclosure.
1
2
3
A
B
C
3
1 After removing the protective covering, wrapping, foam insulation and other packing
materials (instructions found in the Unpacking Instructions guide attached to the outside of
the unit), remove the four bolts A securing the unit to the pallet with an appropriately sized
wrench.
2 Remove the two shipping brackets by pulling the top lip under and away from the unit B.
3 Position at least one person on each side of the unit and slowly push it toward the back of
the shipping pallet C until all four casters go over the edge of the pallet and touch the floor.
WARNING: Use at least one assistant when removing the unit from the pallet.
Unpacking
Note: Make sure the unit and attached pallet is placed on a level surface before unpacking.

Termékspecifikációk

Márka: Tripp Lite
Kategória: légkondicionáló
Modell: SmartRack SRCOOL24K

Szüksége van segítségre?

Ha segítségre van szüksége Tripp Lite SmartRack SRCOOL24K, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók légkondicionáló Tripp Lite

Tripp Lite

Tripp Lite SmartRack SRCOOL24K Útmutató

30 Július 2024
Tripp Lite

Tripp Lite SmartRack SRCOOL2KWM Útmutató

25 Július 2024
Tripp Lite

Tripp Lite SmartRack SRCOOL18K Útmutató

13 Július 2024
Tripp Lite

Tripp Lite SmartRack SRCOOL33K Útmutató

7 Július 2024
Tripp Lite

Tripp Lite SRCOOL7KRM Útmutató

6 Június 2024
Tripp Lite

Tripp Lite SRXCOOL12KB Útmutató

6 Június 2024
Tripp Lite

Tripp Lite SRCOOL12K Útmutató

6 Június 2024

Útmutatók légkondicionáló

Legújabb útmutatók légkondicionáló

LG

LG A09AWG Útmutató

10 Április 2025
Carson

Carson PA240 Útmutató

10 Április 2025
Carson

Carson PA340 Útmutató

10 Április 2025
Midea

Midea MUB-60HRN1 Útmutató

9 Április 2025
Fakir

Fakir 1020 Útmutató

9 Április 2025
Daikin

Daikin FWP17CATN6V3 Útmutató

9 Április 2025
Daikin

Daikin FWP06CAFN6V3 Útmutató

9 Április 2025
Panasonic

Panasonic CS-45KA1E5 Útmutató

9 Április 2025
Daikin

Daikin FXNQ63A2VEB Útmutató

9 Április 2025
Daikin

Daikin FXNQ20A2VEB Útmutató

9 Április 2025