Használati útmutató Tripp Lite SRSEHOOD

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite SRSEHOOD (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
1
WARNING: Do not attempt to use the roof panel for weight-bearing purposes other than those
explicitly described and approved by Tripp Lite. Do not attempt to add or remove the roof panel without
assistance.
Installation Instructions
SmartRack® Service Entry Hood
Model: SRSEHOOD
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
1. Remove the Roof Panel
Models with a Toolless Roof
1 Pull the 2 pins near the rear of
the roof panel A. While holding
the pins, push the roof panel
upward B.
2 Remove the roof panel tabs A
from the roof panel attachment
slots B in the enclosure frame.
3 Lift the roof panel from the
enclosure.
1 2 3
B
A
A
B
Español 3 • Français 5 • Русский 7
2
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
21-04-128 93-3ECE_RevA
Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.
Photos and illustrations may differ slightly from actual products.
2. Installing the Drip-Resistant Cable Access
Housing
1 Remove one of the rubber sealing plugs from the top rear of the
enclosure by pushing it out from inside of the unit.
2 Using the included M4 x 8 mm pan head machine screws and toothed
washers (4 of each), fasten the screws into each of the threaded
holes.
1 2
1 2
1. Remove the Roof Panel (continued)
Models with Screws Securing the Roof
1 Remove the four 4 screws (2 on front, 2 on back) that
attach the roof panel to the unit.
2 Lift the roof panel from the enclosure.
3
ADVERTENCIA: No intente usar el panel de techo para soportar pesos que no sean los descritos
explícitamente y aprobados por Tripp Lite. No intente colocar o retirar el panel de techo sin ayuda.
Instrucciones de Instalación
Capuchón de Entrada para
Servicio SmartRack®
Modelo: SRSEHOOD
1111 W. 35th Street, Chicago, IL 60609, EE. UU. • tripplite.com/support
Copyright © 2021 Tripp Lite. Todos los derechos reservados.
1. Retire el Panel del Techo
Modelos con Techo Sin Herramientas
1 Jale las 2 clavijas cercanas a la
parte trasera del panel de techo A.
Mientras las sostiene, empuje el
panel de techo hacia arriba B.
2 Retire las pestañas A de las
ranuras dejación del panel de
techo B en el marco del gabinete.
3 Levante el panel de techo del
gabinete.
1 2 3
B
A
A
B
English 1 • Français 5 • Русский 7

Termékspecifikációk

Márka: Tripp Lite
Kategória: nincs kategorizálva
Modell: SRSEHOOD

Szüksége van segítségre?

Ha segítségre van szüksége Tripp Lite SRSEHOOD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Tripp Lite

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025