Használati útmutató Vaddio IR

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vaddio IR (4 oldal) a távirányító kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/4
Document Number 411-0058-41 Rev A – August 2022
User Guide for the
Vaddio IR Remote Controller
August 2022
998-2105-000 (Worldwide)
Installing the Batteries
The remote uses two AAA batteries.
1. Remove the cover from the back of the remote. You may need to press down on the
upper edge while sliding it off.
2. Install the batteries as shown in the diagram in the battery opening.
3. Slide and snap the cover back into place.
Tips for Using the Remote
Presets: The remote provides access to camera presets. Your camera’s web interface may
provide access to additional camera presets.
Camera selection: The remote has three IR channels, so it can control up to three
cameras independently. Check your camera’s manual for information on setting it as
camera 1, camera 2, or camera 3. By default, Vaddio cameras respond as camera 1
Troubleshooting tip: If the camera does not respond to the remote, press the Camera 1 button and try
again. If that doesn’t fix the problem, try the other camera selection buttons.
Auto-framing cameras: Auto-framing pauses when you press any button that affects the shot (arrows,
home, zoom, presets).

Termékspecifikációk

Márka: Vaddio
Kategória: távirányító
Modell: IR

Szüksége van segítségre?

Ha segítségre van szüksége Vaddio IR, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek