Használati útmutató Velleman HAM982K

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Velleman HAM982K (52 oldal) a Biztonság kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 3.6 csillagra

Oldal 1/52
HAM982K 1 VELLEMAN
HAM982K – HOME ALARM STARTER SET
Introduction
Thank you for buying the HAM982K! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
The HAM982K home alarm set comprises:
1. 1 x electronic siren
2. 1 x AC power adapter
3. 1 x PIR detector
4. 5 x magnetic reed switches
5. 1 x panic button
6. 1 x 8-zone alarm control panel
These numbers refer to the chapters below.
1. Electronic Siren
5" horn speaker
Operating voltage 6-12Vdc
Peak output power 7W
Current consumption 600mA
Connection diagram: + =red wire
- = black wire
It is important to know if the N.O. contact is of the positive or the negative type. If it is a positive type, connection
should be made as shown above. If it is a negative type, the switch should be on the black (-) wire.
2. AC Power Adapter
Input voltage 230Vac 50Hz
Output voltage 16.5Vac
Output current 3000mA max.
Rated power factor cos φ 0.96
Protection built-in thermal & current fuse
Dimensions (LxWxH) 76 x 89.5 x 62mm
Weight 1.2kg
Connect the 16.5Vac output terminals to the device's input terminals. Make sure its power consumption does not
exceed the maximum rating of the adapter, and that the connection wires are firmly fixed to the terminals.
Then plug the power plug into a 230Vac mains socket.
The power adapter is for indoor use only.

Termékspecifikációk

Márka: Velleman
Kategória: Biztonság
Modell: HAM982K

Szüksége van segítségre?

Ha segítségre van szüksége Velleman HAM982K, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek