Használati útmutató Ventev TW-CTEN-P

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ventev TW-CTEN-P (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.2 csillagra

1.Prepare the ceiling tile grid for a 1’ x 2’ or

2’ x 2’ installation.

2.Determine the correct mounting height of

the access point (AP) mounting plate.

Use the included standoffs for APs with

integrated antennas (Figure 1). For AP

installations using rubber duck antennas,

do not use the mounting plate standoffs

(Figure 2).

3.Secure the AP mounting plate on the

enclosure mounting plate (Figure 3) with

the appropriate hardware. For most

Cisco APs, the mounting holes are

already predrilled into the mounting plate. -

For all other APs, use selftapping -

screws.

4.Install the desired door insert.

5.Place the enclosure into the ceiling tile

grid. Pull power and Ethernet

connections through the provided cord

grips as needed.

6.If desired, install the included ceiling tile

insert for a 2’ x 2’ installation.

7.Secure the enclosure to the ceiling

structure if required by local building

codes.

8.Connect the power and Ethernet to the

AP as recommended by the AP

manufacturer.

9.Install the AP onto the mounting plate.

10.Close the enclosure door and turn the

locking mechanism to lock the enclosure

door (Figure 4).

Figure 1

Figure 3

Figure 2

Figure 4

Termékspecifikációk