Használati útmutató Ventus W263

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ventus W263 (4 oldal) a Időjárás állomás kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.5 csillagra

W263-0 & W235-0

Features:

-Soil moisture

-Soil temperature

-Air temperature on the remote sensor

-Indoor air temperature

-Watering alert display & alarm setting

-Weather Forecast

-Digital clock with daily alarm

Battery installation:

Main unit W203GP:

-Open the battery door and insert 4 pieces of AA batteries according to the polarity shown

Remote sensor W235G0

-For first time use, pull out the plastic strip from the battery door

-For battery replacement, remove the battery door and replace with a new CR2450 battery

Setting up the sensor:

1) Hold the [Channel/Search] button on the main unit W203GP to search for the sensor

2) Select the channel number on the remote sensor by rotating to the desired channel number

3) Hold the [Tx] button inside the battery compartment of the plant sensor W235G0 to transmit

signal

4) Once RF synchronization is completed, the corresponding channel data will be displayed on

the main unit

To setup for another remote sensor, select different channel number on the sensor and follow

above procedure.

Soil moisture display:

Moisture Levels:

Wet 4 bars

Slightly Wet: 3 bars

Slightly Dry: 2 bars

Dry: 1 bar

Buttons & Operation

Key Operation:

[CH (channel) ]:

- Select channel from channel 1,2,3,4,5 & auto-scroll

- Hold to search for remote sensor

[Watering alarm on/off]

-Press to enable / disable the watering alarm

The “AL ((.))” icon appears when it is enabled

Watering alarm beeping pattern:

-Beeps once every 1 minute

-It does not beep from 9pm to 9am

[Up / C/F]

-Press to toggle between degree C & F

-Press to increase digit value in setting mode

[Down]

-Press to increase digit value in setting mode

Termékspecifikációk