Használati útmutató Victron Blue Power IP65 Acculader 6V 12V

Victron Akkumulátor töltő Blue Power IP65 Acculader 6V 12V

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Victron Blue Power IP65 Acculader 6V 12V (51 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/51
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Användarhandbok
SE
Appendix
Automotive IP65 Charger 6V/12V-1,1A
2
3
EN NL FR DE ES SE
1. Introduction
This charger has been designed for charging a variety of 6V and
12V lead acid batteries, such as WET, GEL and AGM, which are
widely used for cars, motorcycles and other vehicles. Battery
capacities range from 1,2Ah to 30Ah. Full protection against
reverse polarity and short-circuiting ensures that the charging
operation is much safer. The charger will wait until a charging
mode has been selected before a connected battery can be
charged.
2. Indicator panel
3. Charging modes, safeguards
[1] STANDBY (STANDBY)
Once connected to the mains, the charger automatically resets and
remains in standby mode until activated by pressing the MODE button.
LED
STATE
STANDBY
Standby, or stopped due to bad connection
6V Press MODE button to select 6V battery
12V 12V battery
!
Reverse connection detected, check polarity
CHARGE
LEVEL Charge Level indicator

Termékspecifikációk

Márka: Victron
Kategória: Akkumulátor töltő
Modell: Blue Power IP65 Acculader 6V 12V

Szüksége van segítségre?

Ha segítségre van szüksége Victron Blue Power IP65 Acculader 6V 12V, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Akkumulátor töltő Victron

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő