Használati útmutató Vitek VT-IPS402H

Vitek nincs kategorizálva VT-IPS402H

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vitek VT-IPS402H (40 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 1.5 felhasználó értékelte átlagosan 4.8 csillagra

Letöltés PDF

Oldal 1/40

BLACKYELLOWMAGENTACYAN

VITEK

VT-IPS402H

4Ch D1 Server Dual Stream

H.264/MJPEG with PoE

• H.264 + H.264 / H.264 + MJPEG Dual Streaming

• 4 Channels of 30 FPS in Full D1 (720x480) Resolution Transmission

• Real-Time monitoring, recording & playback through CMS

• Multiple PTZ & Controller Support

• Power over Ethernet (802.03af) compliant

• Dynamic IP support with DDNS

• 4 Composite BNC connectors

• 4 Alarm Inputs

• 4 Relay Outputs

• 1 Looping Audio Connection

1 RS-422 Input & 1 RS-485 Input for Controller and PTZ integration

1 RS-232C Input for third party integration

1 USB Port for local recording

VT-IPS402H Manual

-1-

Safety Precautions

 Make sure to turn o the power before installing the VIDEO SERVER.

 Do not install under direct sunlight or in dusty areas.

 Make sure to use the product within the temperature and humidity that is specified.

 Do not operate the product in presence of vibrations or strong magnetic fields. the

 Do not put electrically conducting materials in the ventilation hole.

 Do not open the top cover of the product. It may cause a failure or electric shock on the

components.

 To prevent from overheating, make sure to keep the distance at least 10cm from the ventilation

hole.

 Check for proper voltage before connecting the power.

VT-IPS402H Manual

-2-

Table of Contents

Table of Contents .................................................................................................................................... 2

1. Introduction 3 .........................................................................................................................................

1. About this manual ........................................................................................................................ 3

2. Feature ......................................................................................................................................... 3

3. Product and Accessories ............................................................................................................. 5

4. Part Names and Description ........................................................................................................ 6

5. System Modes and Connections ................................................................................................. 7

2. Installation ......................................................................................................................................... 10

1. Connecting Video ....................................................................................................................... 10

2. Connecting Audio ....................................................................................................................... 10

3. Connecting Serial Ports ............................................................................................................. 10

4. Connecting Sensor and Alarm ................................................................................................... 10

5. Connecting Power ...................................................................................................................... 10

6. Checking Operating ................................................................................................................... 10

3. System Operation ............................................................................................................................. 12

1. LED Display ............................................................................................................................... 12

2. Remote Video Monitoring .......................................................................................................... 13

3. Initialization of IP Address .......................................................................................................... 15

4. Remote Configuration ....................................................................................................................... 16

1. Remote Configuration ................................................................................................................ 16

2.1 System Conguration ....................................................................................................... 17

2.2 Video Conguration .......................................................................................................... 19

2.3 Audio Conguration .......................................................................................................... 23

2.4 Network Configuration ...................................................................................................... 24

2.5 Serial Port Configuration ..................................................................................................27

2.6 Event Conguration .......................................................................................................... 29

2.7 Preset Conguration ......................................................................................................... 31

2.8 User Conguration ............................................................................................................ 32

6. Trouble Shooting ............................................................................................................................... 34